• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. M813A1

    Oklahoma City Ghouls Gone Wild Parade

    The Parade is tonight and I did not Put an Entry in !! When I posted for interested peopl the last week of Spetember I did not get any confirmed responses so I did not enter the Oklahoma Convoy Sorry !! I do recomend going downtown to the Parade tonight it is a Cool Parade to watch !! Sorry...
  2. M813A1

    OKC area people with spare parts?

    Check with Warthog he may be able to help you out
  3. M813A1

    antenna sections

    The AB-15 Antenna base with the MS-118, MS-117, and MS-116 antenna sections as long as the total length including the base is a overall lenght of 106" to 110" should be Good enough to give you Good performance with your radio !! If you need to trimm the antenna carefull cut the very top tip ...
  4. M813A1

    Norman, OK - Veteran's Day Parade 2012

    I can give 12 Blue Star Moms a ride !!! lol !!
  5. M813A1

    M51A2 height and weight

    Also if you want to lower the cab protector is just unbolts to lower the height of the truck . When we did movement practices we had to get the top of the vehicle lowered down to the top of the steering wheel for shipment. the top of the steering is the lowest spot you can get the truck down to !!
  6. M813A1

    M151A2 Army Radio Jeep Unit Markings

    most of the equipment back then had the registration numbers on the side of the hood and on the lower back ot the tailgate and the unit numbers were on the front bumper and rear bumperette. All the numbers would have been in white .
  7. M813A1

    couple of questions on the 5 tons

    A good choice of tire is the 1200R20 it is 44 inches and it will pull better then the 1400R20 and you will not loose as much pulling power as you will with the 1400R20 tires . Now in the M939 truck it may not have as much pulling power loss as the M809 trucks because of the automatic . But I had...
  8. M813A1

    "Stumped by a Stump!" Bent Tie rod???

    A Better idea is to get a takeoff from someone that is parting out a truck it will have both tie rods and the draglink and maybe adjusted to keep your alignment right
  9. M813A1

    Norman, OK - Veteran's Day Parade 2012

    OK I am in as always !! I just Hope I can get through the cash crunch I have been in !!
  10. M813A1

    couple of questions on the 5 tons

    Yes to your question all the model trucks use the ame gear ratio of 6:44 to 1 !! Wether it has early 1100:R20 tires or the late 1400:R20 tires the axle ratios are all the same
  11. M813A1

    5 ton misses and dies

    Sounds like you might have an air leak in a fuel line . try and back pressure the tank and use some soapy water at all of the joint in the fuel line and see if you have any bubbles. only use about 5 psi so you do not blow up a line or the tank . also check the cross over lines and selector...
  12. M813A1

    More Power From NHC 250 in M939 Series Trucks With Allison Transmissions

    To Beerslayer yes Cummins made Naturally Aspirated 350's and 400's engines they are torque monsters and sound strong !! I think I am going to just add the fuel button and the fuel line mod to the front of the block. and maybe try the dime in the return line to incease tthe fuel pressure !! And I...
  13. M813A1

    Anyone Recognize this antenna?

    The only problem is that the MS -3916 is non tunable it is automatically tuned because it is a broadbanded antenna. The best setup I think for a CB with Military antenna is the AB-15 antenna base with the MS-116, MS-117 , MS-118 anenna sections with an overall length of 110" including the base ...
  14. M813A1

    Anyone Recognize this antenna?

    That is a AS-3916 antenna Base with the Stainless Steel whip used for the SINCGARS radio system
  15. M813A1

    5 Ton turbo on a 2 1/2 Ton

    The turbo off any M39 5 ton truck with the Multifuel Continential motor with a turbo will fit your Duece motor the LDS and LDt part do interchange !! The only model M39 5 ton Multifueler that its parts will NOT fit is the M54A2 with the Mack ENDT motor and NONE of the engine parts from the...
  16. M813A1

    Oklahoma City Ghouls Gone Wild Parade

    Just a reminder any people joining in the parade have to be over 18 years old !! And you cannot throw anything out either !! But we can get all dressed up and have a bunch of fun !!:beer:
  17. M813A1

    Oklahoma City Ghouls Gone Wild Parade

    OK Olkahoma SS guys if we are going to be in the Ghouls Gone Wild Parade I need a Head count of people that want to join in !! I check back on Thursday Afternoon and if noone is interested I will not send in the parade application. So let me know soon !!
  18. M813A1

    939-809 parts interchange question

    well the easiest thing is just get some hemett rims and put the 1400.20 tires on !! But I would recommend the 395's or a set of 1200.20 tires instead. I ran a set of the 1400.20 tires, yes I got more road speed but WOW does it loose pull power on the taller tires !! IMHO I would stay with the...
Top