Search results

Flame deserves member of the day... He used the Search! :grd: Seriously, awesome work!

Yours is an easy unit to rebuild. Rebuild is the preferred bypass. The schematics are super easy. Happy to talk you through it. PM sent.

IP leaking or lift pump leaking?... Lift pump will contaminate oil. Maybe my wires are crossed? Sorry, I misread. I thought this was a lift pump problem.

You probably have a blown PCB. Replace or rebuild.

Please avoid pulling the IP open. Just sayin’ 😉

Welcome to the forum. You need to give us more information. How much fuel in fuel cell? Does the problem occur with half empty tank, full tank. Have you removed the check valves? Have you replaced the lift pump? Did this happen after new fuel purchase, implying bad fuel or water in fuel...

So you have a properly working truck but you decided to open the turbo just for kicks. I don’t get it.

For your edification. First schematic should help. Next should show you how to rebuild. https://www.steelsoldiers.com/threads/how-to-bypass-pcb-i-am-aware-some-hmmwv-owners-have-done-it.182560/

Change your oil ASAP. There is a strong risk that the fuel pump has spashed Diesel fuel into your oil, killing the viscosity. Don’t run your engine until the oil is changed and the pump is swapped out. IMHO

You need to identify the wire numbers. It seems to be near and perhaps involving the wires going to, and from the direction control module/flasher and directional controls. Perhaps it is a defeat to prevent nighttime lights from coming on when in battle? There is already a control module for...

They look like lateral mounts to stabilize the four corners and lift the truck to keep it level. Same stuff like what they use for mobile cranes. Similar stuff on M1101/1102

My garage door keeps going up and down. Stop flipping the darned switch! 😠😡😤 😄😅😂

Old tech and superseded. I now want one that reads “Plaid”😂

Sounds like DEAD BATTERIES OR POOR CONNECTION. I recently had someone call me because he thought the protective control box I sold him was bad. I offered to send him a new one. He then went under his passenger seat and found that the battery connection fell off. Right after that, his car...

Yes, you’re missing something. When you remove the glow plug you blow the bits out and or retrieve them via the injector hole.

You have received a PM

Now there might be pressure leaks preventing the cylinder from working properly. That broken stuff should come out imho

If you wait you will lose all motivation

Not su Not sure you need to remove the heads. Pull the injectors and push the broken bits down and remove through Injector holes. PB blaster first. Drill out the broken hex and either Heli Coil or drill and tap a larger hole to accept a larger outer thread diameter with inner thread of the...

Hey Eric Hey Eric! When are you gonna actually stop polishing and start driving that trailer queen?!?! LOL See you soon my great friend!