Search results

Tool #2 does have threads to attach where the nut that held the steering wheel on. The tool presses on a plate so that you can release a clip#3. This plate and the spring beneath must be removed to access everything beneath. Hope this helps!

I've never been inside one, however these "shelters" sure look like the x-ray trucks they use in the oilfield to quality check pipe welds and such. I have done some x-ray/radiograph developing and I think I see some developing tanks in the back ground.

Tm9-2320-242-10-1 M561 - Operation manual

Gave it a try the same way I would post pics in a thread, with "manage attachements". Any files over 60MB were immediately flagged (red circle with white !) and they were not qued for upload. I tried 2 files less than 60MB (one 59 and the other around 39) and they went through the motions of...

Largest is 98,277KB and I have several in the 95,000KB range.

Yes sir, all are in PDF format.

With MegaUpload out of the picture how does one upload a big file such as a TM? Do we email to a particular Mod, Admin or to patracy? What is the largest file we can upload at one time?

Are the LEDs equally bright regardless of what voltage they receive??

Thanks. That's my vehcle wiring OCD showing up, I can't stand to have wires just dangling. Guess you could do the same for the Deuce, you'd just have to switch out ALL the bulbs on your trailer to 24V............then back again when you're pulling with your civy. The CUCV's hybrid 24V system...

Took some pics when I got home of my pigtail. I'm not sure they'll help with anything, but guess they couldn't hurt. Momma asked, if you have any additional info on your catahoula or pics, could you send it.

These might help. I always like to have references in color handy when I start wiring something, even if I've done it several times before.

What issues are you having? Problems with the trailer side or the truck side? I had a OEM trailer connector from my M416 that plugs into my M1009, then I ran the cable into a RV 7 outlet. I've converted all my trailers to 7way RV's. I REALLY wish I could say yes to the "rescue", but I' got 3...

Thanks for the "after action report"! Keep us updated as to whether the replacement alt is the final fix.

Start all electrical trouble shooting on theses CUCV's with two fully charged AND load tested batteries. From experience I can tell you that one battery can show 12V, but as soon as you turn the key one put a load on it, it falls to below 6V. Since the CUCV has a hybrid 24V system, all it...

She looks great!! Congrats and welcome to the site!

FANTASTIC work!! Wish I had that dedication to finish my Rover.

I'll ditto what they've been saying about electrical systems and salt or brackish water. After hurricane Ike, we found anything that went under with the battery still connected, had + connections corroded off in a matter of hours. Good luck and great to hear y'all made it through!!!!

I used the folding 2000 lbs engine stand from HF when I swapped 6.2's. It did rotate but it took a 3 ft cheater pipe to make sure it rotated slow enough and it will bend the cheapy bar on the back. Other than that, it's still working well.

Well the search function worked for me!! I when out today and hooked up to a trailer I've been using on a regular basis this last four weeks and no turn signals as I did my walk around, no hazards either. Every other light and the horn did work. Had to go on without turns but when I got back I...