Search results

I have a few questions for the knowledgable people here. From the pics below, is the bracket and holder on the throttle shaft standard? It starts to bind up hard before the throttle reaches the fully open position, I undid it and the throttle moved much more freely, just wondering if it...

I'd be interested in some spares.

Awesome, thanks mate!

Hi all, I'm chasing some goat parts from various vendors and have had a request for part numbers but am having trouble finding some numbers, can anyone help out with part numbers for the following? Canvas for cab (top and doors) Canvas for rear bed Rubber brake hoses Water pump belts...

A bit of goat progress today. I drained the fuel tanks and cleaned them out as best I could, the baffles in them make it a bit difficult. There was a lot of sludge in the bottom from moisture and bad fuel, I added some new clean fuel and changed the filters again. I adjusted the throttle stop...

No worries mate, I'll send you the details as soon as I pick it up.

Hi mate, My local autobarn sourced it for me, it's ordered but I haven't picked it up yet, 4L cost me about $150.

Wish I'd known that before I bought a gallon of silicone fluid, I do plan to swim mine occasionally so maybe a good thing I stuck with silicone. I'm all over the bearing seal spacer ring, I actually tried to install one hub without the spacer just so I could move the goat about 10' but I found...

I'm humbled and very thankful for the help of the members here, in particular m38inmaine and mkcoen. Being is Aus makes goat parts hard to find. Planning to pull the fuel tanks this weekend and clean them out, flush the lines and replace filters again to try and sort the lack or power, I have...

Another question worth asking here, the rubber brake and air lines on my goat are screwed directly into the stub axle flanges, it seems to me there should be an adaptor between the hose and the flange, otherwise the tapered seat in the brake hose doesn't shoulder out tight onto anything. I can't...

Only passing on what muttparts told me.

PM sent, thanks.

PM sent!

Muttparts have just sold their entire stock of goat parts to another party, it's not clear yet if they will be for sale or not.

Top corner.

Brilliant! That will sort me out nicely, my thanks again. I also need one of the screw in lifting eyes from the body, I'm missing one.

I definitely do still need bearing seals, that would be awesome! Thanks very much.

Thanks for the tip, I sent them an email and they do still have some. Now I just need to figure out how to get it from Texas to California to be shipped to Aus.

A long time between updates but I have been very busy on the goat. I stripped all the hubs and pulled the driveshafts, it's easy to tell which nipples are hard to grease, those ones were all dry. I had to replace some unis and bearings, I managed to source these locally but they were very...

So after a number of weeks of stripping and rebuilding hubs and driveshafts, I finally got all the hubs back together last night. I couldn't resist bolting the brake drums on (no brake assemblies fitted) and going for a quick drive. I live in a rural area so there is really nothing to hit, and...