• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. H

    Cracked frame by steering box

  2. H

    Cab roof insulation

  3. H

    Cab roof insulation

    I used both the Ceramic Insulation and Sound Control Lizard skin on the Cab ceiling/topper roof and floor. Both applications work well. Floor was finished off with Line-X - right over the top of the lizard skin. I live in the desert. In dead August my hand can feel little heat when placed on...
  4. H

    York 210 on board air mount, pics

    Nice work. What is the path the air hose took from the compressor into the cab and from the cab entry point to the tank? thank-you
  5. H

    Size and weight of the M1009

    My fully loaded 1009 tips the CAT scale at 7777 with me in it. 1 tons ARB's Disc brakes 126 gallons fuel Shankum built front and rear bumpers with Wern winch/compressor LineX and lizard skin interior coatings top and bottom pinon guard 6 quantity 285/75 R16 GoodYear Kevlars (desert driving) 60...
  6. H

    Size and weight of the M1009

    Olly Hondro, mind me asking what the C02 tank is for? thanks,,,Honda
  7. H

    How to keep her cool?

    I installed the same cooling retrofit as Rusty on my 1009. Difference is my 373 gears ( 1 Tons ) and Banks Turbo. Before retrofit I was sometimes charting 205-220 on the temp gauge with stock 308 gears and 3/4 ton axles, ~ 2350 rpm while climbing from 2600 to 3600 in 10 miles and depressed at...
  8. H

    Whos installed HAM Radio's in CUCV's

  9. H

    social pressure to install a cage....

    This is the chap who built/installed my interior cage....http://www.hunteroffroad.com/. ( Tempe AZ ) Outstanding fab skillset, lots of patience and overall cool dude. Bonafide KA welder. Check out his website. After his work I installed a removable harness bar for the five point harnesses (...
  10. H

    CUCV Cooling System Upgrade Kit

    10/4 on the location. I see you're in Tempe. John Hunter (Hunter offroad) in Tempe did my roll cage. More than excellent work. Great guy too. He also scored my Blac Rac mounts. I drive mostly at night when temps are a bit cooler. When I day drive its mostly in the desert on 2 trackers around...
  11. H

    CUCV Cooling System Upgrade Kit

    I kinda like the blue color. Reminds me of dingo balls hanging from the headliner. In that I drive a lot by the southern border the multi color engine look helps me blend in with the natives. :-P I do like the idea of the steel braid. July/August/Sept desert driving temps under the hood are...
  12. H

    D60/14BFF Axle Swap on M1009

    Factory, OEM 208. Case has been through some rough times in the AZ outback. Case components were pleasingly tight when it came apart to add the SYE which came from Tom Woods ( Ogden ). Excellent service, 2 day turn around and I live 900 miles away from the dude. I called in with the shaft...
  13. H

    Cooling upgrade system.

  14. H

    Cooling upgrade system.

    Each reader can do their own individual evaluation of the data. I'm just gonna report. You decide. ( mmmm...maybe I can get a job doing the nightly news}
  15. H

    Cooling upgrade system.

    Traveled the Ajo AZ desert this weekend ( 400+ miles) and collected pre-install data prior to installing coolant kit last night. Kit went in well - no leaks. Tight install. Will travel desert again this weekend and collect post install data. I expect coolant temps to stay out of the 200+...
  16. H

    Paradox by Design CUCV HMMWV cooling kit

    Let us know if you get stuck removing your vacuum pump or how you work around that stainless line on the passenger side. Thanks
  17. H

    rust repair

    Rust never sleeps. Every rust spot I cut out was followed by the following http://www.eastwood.com/ew-silver-rust-encapsulator-15oz-aer.html before welding in the patch steel. The product comes with a very long tube to insert way up into the passage way in all directions between the two metal...
  18. H

    M1009 frame question

    The ORD kit worked well for me. The frame was cracked in 4 places in and around the steering box. ( self-inflicted misery ) Plan on maybe having to hog out the steering box bolt holes in the weld plate a bit if you use the weld kit, maybe even with the bolt on kit. Also, read and FOLLOW the...
  19. H

    D60/14BFF Axle Swap on M1009

    10/4 on the paint. Got a little ahead of myself when things started going together well. Got a little rust bullet left over from the body work Stuff works great.
  20. H

    Changing the Harmonic Balancer Questions any advice or comment?

    One of the five best improvements I made to my truck. A bit pricey, but in my opinion, well worth the coins.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks