Search results

Military and First Responder Vehicle Show July 31, 2022 10AM to 3:00 Pm El Cajon, CA 92019

Great thread. Looks straight forward! Any photos of permanent mount? Does it adjust with your trailer brake unit? Gain?

Can a local shop make one? Can it be 3D Printed? Can you fit another master cylinder? Just throwing ideas out! My rear wheel is leaking and I have no pressure now. Next months project.

If its rattle cans, I have had no problem. I have used KILZ 2 in a spray can to cover areas if I was concerned. The BEHR has built in primer.

1 day should be enough. Use BEHR Ultra. It has a primer built in!

IN The Real World! Came out great!

Looks Awesome! Black wheels?

So the 1105500 Alternator is not made any more. I found this on Amazon? Amazon.com: Rareelectrical New Type Isolated Ground Cucv 12 Volt 100 Amp Alternator Compatible With Part Number 10459234 : Automotive The DL7157 is 78 amps and someone mentioned 100 amps? I will bench test my old one...

Are you driving yet? How is it? Power to wheels? Fuel economy?

Yes they work well. Good tires help too!

The goat is a diesel. You would need a hydraboost. Or you could do air over hydraulic. The space under dash is a challenge.

6 to 8 inches. That is what the manual said. It works great thinned.

No overspray issue with the gun I use. I did not remove grill as I am lazy and no overspray on the radiator. I did not even use a drop cloth. I consider it a military vehicle and saw some of the guys assigned paint duty in other units and they were using brushes. Mine I think looks better than...

Did you ever stencil? I am getting ready for mine!

33x12.50R15LT Hope that helps!

Satin was just as hard after cure time. My trucks sit outside. If I get 10 years I will just respray. The Behr Premium Ultra has a primer mixed in. It only takes two days for two coats after the prep is done.

When it comes to cost, Behr wins hands down! Easy clean up, Easy application, Easy touch up. No shipping, Only downside is the 30 day cure! I can live with that. I get tons of compliments! Will be starting on vehicle number seven in a couple of weeks.

I used 1 gallon green. 2 coats and a couple of areas have 3. I picked up for 3 color camo but my daughter likes the green. I mark out the design with chalk and use the same sprayer. Practice on cardboard and it works great. Soft edges like the original. Pretty flat! Looks like carc. I have...

Don't look behind the curtain! I was extending my break! Attention K Mart Shoppers!

Second Coat. I have some details to correct as I was lazy on the preparation. Night and Day! I attached a before!