• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Bill Nutting

    M37 Barn Find

    I can't get the turn signals to work.... Anti gravity may be OVER MY HEAD! :unsure:
  2. Bill Nutting

    New guy from Idaho county Idaho

    On the top menu press upgrade, you will use your log in and then be presented with a couple of options.
  3. Bill Nutting

    Cummins NHC 250 High Idle Problem

    I had a problem with my truck loosing it’s prime. I put an electric fuel pump on it right at the tank. It started right up. Then I noticed a fuel leak. One of the plastic lines on the pump had a split. In was on the suction side so it didn’t leak until I put pressure on it. Replaced the plastic...
  4. Bill Nutting

    Gauging some interest in an M939 Camper Conversion (in progress)

    Your Truck sounds like a M934. Does it look like this?
  5. Bill Nutting

    M37 Fuel pump, original or electric?

    You are so right. Finding a working M series coil is a challenge. I’ve been told the new chrome ones come from Korea. I don’t know if that is true but they don’t take the heat very well. I imagine it gets pretty hot inside the distributor housing even with the little vacuum line that is supposed...
  6. Bill Nutting

    M37 Fuel pump, original or electric?

    I put an electric pump on it today. I just happened to a 24 volt Facet pump in stock. It’s getting plenty of fuel now but it quits running after it warms up. It will get a new coil tomorrow.
  7. Bill Nutting

    MV of the Month June 2020

    Thanks! We restored this 151 for my wife from 2014 - 2016. It scored 99.07% at the 2017 convention. We had a lot of help from a couple of guys. One of them know these MUTTS inside and out, the other guy was a sheet metal and mechanical genius. We taught my wife, Jan, how to weld, grind, and...
  8. Bill Nutting

    MV of the Month June 2020

    I would like to nominate my 1970 M151A2.
  9. Bill Nutting

    M923a2 cab leaking water

    Once you get the floor rust under control, take a look at horse trailer rubber mat (tractor Supply). I covered the floor in my M934 with it. It’s about a half inch thick, has a diamond plate pattern on one side and is made from recycled tires. It’s very dense stuff. I cut it with a saber saw...
  10. Bill Nutting

    M923a2 cab leaking water

    If Simp says it works, it does! I would like to know if it dries or stays flexible and can it be painted over... What we need is a vat of this stuff big enough to dip the cab in. 😜
  11. Bill Nutting

    Bought a few surplus engines...

    That Allis Chalmers 3500 is a 150 hp, in-line 6. I wonder if it could re-power an M37?
  12. Bill Nutting

    M923a2 cab leaking water

    The can says, among other thins, gutters and roof flashings. I have been known to use Flex Seal to plug things up. I think it’s latex based...
  13. Bill Nutting

    M37 Fuel pump, original or electric?

    My 66 year old fuel pump gave up. I would like some opinions on whether to rebuild, replace or abandon the mechanical pump and switch to an electric fuel pump?
  14. Bill Nutting

    New guy from North Carolina

    Welcome aboard from Michigan.
  15. Bill Nutting

    I just won this M1082 2013 Oshkosh

    If your M925 is in good shape, why wouldn’t you tow this trailer with that? A couple of air lines and an inter-vehicle cable and you’re all set. Once you get it home do you plan to use it behind your 925?
  16. Bill Nutting

    Inherited deuce, looking for some help with identification

    Welcome to the site. So sorry to hear about your father in law. Do you know if he was a member of Steel Soldiers? If so, perhaps we could look for some past posts that might shed some light on the history of this truck. Who knows someone near Indianapolis with a deuce that might be able to test...
  17. Bill Nutting

    Too Many Deuces?

    Ahh, the force is strong with this one!
  18. Bill Nutting

    I went back and bought the truck

    Well, that is one fine looking truck. Do you have a long driveway? Why does that matter, you may say. Because before you know it this is going to be the first of several MV’s. It always starts with one. Then the sickness sets in and you wake up one morning and there are three or four MV’s in the...
  19. Bill Nutting

    Buyer beware, Austin Mn

    As far as I’m concerned, there is nothing wrong with exposing people that rip us off. If we were sitting around a camp fire, you wouldn’t hesitate to name names. This site, to me, is like that. If I know someone is not honorable, has ripped me off, I will post it. If this saves one of you from...
  20. Bill Nutting

    Harbor Freight Safety Recall

    I have an idea! Let’s reward the communist Chinese for infecting the world and destroying the world economy by shopping at Harbor freight. I think there should be standards for all products to be CLEARLY labeled with country of origin. None of this fine print so small you have to hunt for it...
Top