Search results

PBC for what? > How fast/far the passenger ejection seat works?? > remote for using like Full Size RC truck??? > rear steer?, > Hydraulic Hopping??

If it is ..... it beats my shop . (for now.. thats next project after Jeep gets running)

apologize.. in a hurry and didnt look in advance... are you putting a build thread here in the Military RV Camper Conversion Forum on this board? Folk would love it if you are https://www.steelsoldiers.com/forums/rv-camper-conversion.176/

@Ronmar was kind enough to link it for you. For future reference .. the forum with all the manuals (Technical Manuals) is page one of this whole Discussion Board's forums. Home / Forums / Technical Manuals / pick your vehicle FMTV in this case

was searching about common grounds between 12v and 24v... for a different project.... Found this thread. Answered my question. you can have common ground between 12v and 24v. For shiats and grins will bring this ancient thread up and throw a monkey wrench between the battery lugs and let it...

more detail please on "mark the gear reduction unit" thanks in advance

mucho grassy-ass :beer: for all this documenting / helping other members here out

could it be only getting pushed in by pressure..... aka driving in rain? maybe try a water hose jet cleaning wand...... especially on the over windshield marker lights.... and similar?

Well since your eliminating all possibilities ..... Wear Depends for a while? :ROFLMAO:

look forward to video and/or write up on this. would be much appreciated

Dexter Brake?? with Lunette ring https://www.etrailer.com/Brake-Actuator/Dexter/T4848600.html?feed=npn&gad_source=5&gclid=EAIaIQobChMI2pjEwcu0hwMVUCCtBh0WZgonEAQYASABEgK61_D_BwE other wise the channel with holes in it designed to fit a lunette ring.... that alone can be found at...

consider going forward not backward (or both). AKA one fella (granted his was an Ambo box) made a front sleeping birth . Basically where a 1079 has the front hang over above the spare..... well he built a solid version of that and cut out top portion of front wall to match. Great use of...

Well I am a Pro at somethings....... but trailers ain't one of them. You might need to put a link.... apparently folk are not familiar with that trailer manufacture

ifff your going to be off road.... those air lifts beams on the sides may be good for pulling a laying down elephant of truck, back on its's wheels. I have a 3rd winch that am going to have a receiver mount plate made up to slide into whichever one I need, if my twuck decides to do the...

ahhh. ok.. exhaust valve = Pakbrake this time. Yeah knew you were going that direction.. the re-wording of it threw me off is all . Got me wondering that maybe you changed your mind and were heading in a new direction.

Now what tya hiding from us.. Exhaust brake valve? You putting a Jake brake of some sort on your exhaust?

keep in mind..... bolts I think are different sizes. iffff I recall right it was like top and bottom are different..... or it was rear axle vs front axle.... maybe both..

So you giving up and going back to your 404 yet? 🤠 :ROFLMAO:. you'll figure it out. look at fuse panel and see if you got the breakers in their for lights etc. They may have been robbed from the truck for other trucks. Happens.

just saw today fittings with the O-ring. appears the flare part is JIC ORB (O-Ring Boss) and the straight side with O-Ring is SAE o ring boss. supposedly they are for more unforgiving environments

hmmm. does something have it stuck in MODE (4wd) that might explain both these