Search results

Hey Guys, I'm having some engine trouble with the M1009 that has me a bit stumped. I drove it to work the other day and everything was swell. When I started it to go to lunch as soon as it started it revved way up to ~3k like the throttle was stuck open, but before I had a chance to acknowledge...

More looking to get something original looking without spending money on another grille that is just as old and brittle as the one on there. If the LMC ones are junk then I guess an original one would be better.

Looking to replace a cracked grille on my '84 M1009. It looks like LMC now offeres replacement grilles for the '84 with the chevy logo, etc. The part number form LMC is 38-4156 for the single headlight version, but it almost looks like the dual headlight version is a better match. Has anyone...

That's what I'd like to protect for. Being an Arizona truck it has next to no rust on it. However when we are going along trails that are a bit overgrown the trees really tear into things. From my experience the CARC has held up well to this and comes out unscathed. My main concern is some of...

Hi Guys, I have an M1009 and an M116A3 that need paint. They both get worked pretty heavily off-road so I would like to paint them with carc or something that stands up as well. Is there a good source for buying current milspec paint? I'd like to keep it brake fluid resistant, etc.

Hi Guys, Looking at an Mep-803a coming up for auction on gov liquidation. I haven't bought from the auction site before or have much info on the genset. How are they for reliability and parts availability? Anything special I need to know about bidding on them on gov liquidation? Fees, forms, etc?

Here is a writeup I did for making the pioneer / ATP cable work. It works fine if you cut the end as shown so it can fully return to idle position. This is what I am running and haven't had a problem yet...

Anyone try these? https://www.millsupply.com/29-accelerator-cable-54911.php?p=47085

Its usually only driven in the summer here when its about 100* out. Whats the issue (other than burning out the other plugs) with worn out glow plugs? It usually starts in 2-3 seconds.

Well since I have owned my CUCV I have always suspected something was a little funky with the motor. It has a tick on the drivers side of the intake when the air filter is off and when you have ear plugs in you can hear there is more clatter at the drivers side valve cover than the passenger...

Sorry a truck

What's a fair price for a service body with about 80k miles in decent condition? Has the gen set and compressor. Seems likes the value of cucv's have gone up quite a bit since I bought my 1009 in 2010.

Pulled the converter box out and it's about 3-5 mph slow which is close enought. That's with 4.10's and 36's

Thanks, do you happen to know what the stock drive and driven gear colors are? I can't look at the truck as it is 15 hours away and I want to be able to just throw the parts in when I'm back for a few days over the holiday.

My m1009 has been off by about 20MPH for the last 4 years which I don't really mind other than the odometer artificially skyrocketing. I'm running 4.10 gears and 36in tires. I've heard there is a converter box on the M1009 that changes the speedo ratio as well as the gears in the T case. Do I...

ATP Y270 is pretty similar to the Pioneer cable, too short on the engine side. Works ok if you cut the crimp indicated in the pictures below off :| . I wonder if we get enough people to contact ATP or Pioneer if they will adjust it. I know the one they used to make 4 years ago worked fine.

Got the cable in…looks similar to the pioneer, but might work. I'll try to install it on monday/tuesday and let you know how it goes.

I had no luck with the Pioneer cable also. Took a look at my buddies '84 K10 diesel and that cable matches the CUCV so that pioneer cable doesn't look like it will work for either 6.2 diesel application. I sent pioneer a message as well to see if they can take another look at it and get it...

Did you ever hear back from pioneer? Having the same issue with the pioneer cables from the parts houses. I bough one from the same oriely (was checkers) 4 years ago and it was a perfect fit.

Gotcha, I guess I should have realized that since its is 21.5:1 compression. If it helps any it also seems to have more black/grey smoke out the drivers pipe when it does it.