Search results

Thanks guys when I try the search it end up give me cucv and some other I'll tinker with it some more .

Yes used the search and didn't come across anything in this field and the resource tab at the top just returns me to the home page for some reason.

is leaking and is getting everything below soaked. How hard is this to fix? What are some point of interest when trying to repair?

I got an inch of play... No smells that I can tell but metal on metal not sure if it is.. I know if I don't get on the gas right away it won't slip

pulled the access plate off today and sprayed brake cleaner up there about 1 and half cans. are the throw bearing in that access plate to gease or are there somewhere else ? I took it for a drive right after and slipping got worse(alot of rpm not alot of movenment ) then better( less...

I wanted to reduce noise as well so this is what I did 1>aluminum backed insulation on the underside and topside of the transmission cover plates 2> Hercules bed liner firewall,floors and doors ( WARNING sand everything before appling DO NOT cover over the rust ) 3> Marine grade carpet...

is it PTO or Electric? Whats is your dump time?

How do you flush out the bell housing out. is there an access panel or do I have to pull the trans?

On the way home my clutch started slipping. My question is if you over filled the transmission would it cause the clutch to slip? When I got the truck the Trans and transfer were overfilled bad. Try to get all the fluid out but its at the fill plug at both.

I start in 2nd but sometime I have to give it a little gas before I get it into 2nd with the shifter, clutch depressed of course.

I was waiting for someone to say that.

enroute in 30mins, got paper plates and cups

I plan on coming in the morning. Do we need anything?

This project is done for now.. http://www.steelsoldiers.com/members/vfflang-albums-lang-deuce-picture15375-greydeuce1.jpg

painted grey

My brush truck at the fire department has a simliar problem cranks and starts no problem but after a call if you turn it off it won't restart...it will try to start but won't turn over usaully we have to wait for 30mins to an hour before we can get it to start...not sure whats wrong with it.

How about avalon rd .. I will be bringing my m35a2. Have to make a wedding at 3pm maybe we can move it back alittle or ill meet you there.

I'm going to say me +1 no sure ... If should come in the morning or afternoon ...my buddy is get married at 3pm ...still debating...

Are we also take run convoy to old town just stay there?

so what time on the 23rd are we meeting up