Search results

Can't say I know what CRACK is all about but if ya sand off enough of that CARC paint stuff and snort it you will be really sorry you did it, I bet. :-) I wish I had an ISO bed and a place up the middle, from the rear, to store the side panels in when not in use. Balz Out but beware...

The Red Dot R-9777 unit would be my first choice once your compressor situation is squared away. I believe it has a built in condenser and it is Heat and A/C. There is enough real estate on top of a hardtop, weight is an issue. That can be handled by a cantilevered mount off of some M66 gun...

If I eluded to it being expensive, excuse me, I felt it was $100 shy of what he should have charged. I didn't argue the point!

I have known for a while my front driveshaft needed service. You could feel the slightest of vibrations at freeway speeds and if you physically yanked on it you can feel/see just a wee bit of play. There was the smallest of play between the male and female telescoping splines. I found the...

I think I can SuperSize that; What happened when you did your C.O.L.A.S. test before you drove it for the first time? :tank:

If you go w/ LED and if you are in snow and ice country, remember LEDs rarely get hot enough to shed snow which can be a real issue. Truck-Lite does make a heated LED, auto-thermostat if I remember correctly. Check your voltage and wiring config and start w/ a Truck-Lite #07496 or NSN...

I have the same seats, I put two in my M916 and I have two more for my M925A1. Did you use a pedestal or did you bolt it right to the floor? Do you wish you had used a pedestal? Looks like a long ways from the bottom of the steering wheel to the top of the seat. If you pump it FULL of air...

Gremlins are REAL

How about flying SS member 98G out there and having him drive it home to his place in Az perhaps? I am just assuming he would do this but worth-a shot.

I have some 12 pairs of matching snow chains for 1400 tires left that will make that beast crawl out of that hole in 30 seconds I bet w/o any help. Yea, you will need to install them first. Not a big deal for a couple men and some hot totties. They ship USPS flat rate, one chain per box. PM...

I am considering getting a trailer in Herlong. If anyone is considering getting stuff and needs it delivered to So Cal PM me. SOON Maybe we can parlay a good savings.

Nope, no stealing, "Sharing" is what makes this forum great... Carry On...

Right or wrong I used a m939 series heater switch w/ a diode. There is a thread on this. Please don't ask me to find it. Do an advanced search with "Artisan" as the poster and for key words try "switch diode IR lights" . I "think" it was in the 5 ton area. In a nutshell I have high and low...

Very nice work my friend... I have a couple more of those boxes I would let go if anyone is interested.

M925A1 = Sweet! Sub'd in! Armored and crew-cab! NICE!

One is tacked in, a work in progress

Yes, I have considered it, but the weight kills it for me. You could weld in more cross members for support and you could deck it w/ up to 7/16" thickness of whatnot I do believe. If you want to just drive on and off you can do this just where the tires hit the floor and not deck the whole...

It makes a purchase less desirable. GL lost the ROLLING STOCK deal to GP and they want to try to recoup funds. I have definitely stopped many buys over this. 2.5% sounds like not much. GUESS WHAT...................

Badazz......................................

That is a good feeling, all home and safe...