Search results

In my book w/ my current limited knowledge you are looking at a tractor that is wayyyyy to small. 60 to 80K in weight? I don't care if it is only 5 miles away, if your driving on state roads you could be told to PARK IT if caught. Never mind the tractor brakes will be way overloaded. Here is a...

It's something silly... Trace your steps, look at where your hands were. Did you accidently bend anything, unplug something, do any weird voodoo? Are you out of fuel? Get the batteries topped off but GOOD, crank he engine and squirt ether while cranking thru the air cleaner up high. Battery...

Pending nothing else happening I might pop in w/ my 20Ton.

Karl, Under both headlights there are electrical junction blocks and you should consider pulling the headlights and looking at everything, in particular the grounds in there, if things are rusty take stuff apart and buff to bare steal, apply dielectric grease and reassemble. It made my...

They are an Automatic Reset. If you remove the short it will reset automatically. I know, I am not a fan of them either but on the battlefield it is one less part to carry. I wish I was better w/ electricity to even be able ot tell which one tripped! I guess look for what does not work!

TURBOs To the best of my knowledge; The BHT3B SUPERCEADES THE HT3B AND THE HT3B SUPERCEADES THE T-50

-24P says they are supposed to be; P/N MA254-21005 NSN= 5330-01-095-4656

I started to get a block heater and after I D/L'd the phillipsandtemro.com poop I am confused. Is there a large hose you connect to this thing too?

I would very much like to see some close ups of your mount if possible please.

lol!

There is no round companion flange open and spinning in the front, I do believe, FWIW.

I am inclined to agree cb, I do believe this would work. I can draw in CAD that flange but it sure would be nice to have one in hand to measure instead of off the truck so I seek one of those flanges if anyone has one. Send it free and if/when I get a mate I will give you one free. LOOK IN...

PS, where can a guy buy a cheap flange that will connect to that rear, open spining flange?

If I had a towbar that I fab'd up that was, Lunette Ring X Lunette Ring, and if I connected said towbar to the rear of my truck at the pintle hitch and then to the rear of a mired truck we are pretty much solid. Right? Right... So were butt to butt, (please, lets be professional here you fags...

The constant draw is for the clock, yes?

I am open to new things. Is there a pictorial on how to do this?

I have an M925A1 The tranny is a MONSTER, you are driving it empty, it will shutter downshifting like a punk rocker in a mosh pit when empty. Put 6K in the back and drive it again...you will see what I mean. I pulled 7 trucks up and down hills for about 150 miles or so, it barely took the...

The link to the TM I have above is to just PART of TM 55-2320-273-14. An M915 = 14 Ton An M916 = 20 ton An M920 = 20 Ton Go figure! Ha! I added pics in post 212 to show what I found.

HA! I was contemplating that myself, let me go look.

An M916 is a "20-Ton" :-) The TM says so............