Search results

RE: Re: RE: M116A2 Mule hauler mangus,do you have those web tire straps?

Not sure what color to paint the trailer yet. It's been converted to 12v tail lights (light gulbs)and an M series trailer receptacle is newly installed on the pick up truck. Not sure about a tan mule Mike. I do have the bows and a green top so we may be going with USMC green on the trailer.

I have been welding, cutting, welding and ginding on the M416A2 generator trailer since Gilbert to get it ready for its transformation from generator platform to be an accecptable mule hauler. The distance between the fenders was increased, tie down slots were cut into the deck with plate steel...

Using an electrical meter, take voltage readings while the generator is running before attempting to hook it up to the garage.

I was unable to cross reference the shock number from the manual (thanks ACE) but was able to match up a shock from NAPA the number is 94190 for the shock. It comes with the correct rubber bushings but you need to reuse the washers. The master cylinder used for the surge brake is a NAPA 2796...

roadside help Anyone traveling along I95 between baltimore and philly can call me for roadside rescue at 302 690 1835

anyone

anyone?? emmando?

Anyone know the civilian equal for the shocks? I need to replace them. I also need a replacement hand brake, I will take 2 if they are available. The hand brake cables are fine. Any tan tops for the M116A2 trailer?

That light cable is most likely connected to the military towing light set up. Its a light bar with military tail and marker lights that you strap to the bumper of the towed vehicle that when plugged into the towing vehicle's trailer receptacle operates the lights.

I just had 2 tires fixed on my truck. Drove over to the truck tire service place. The tires were in the rear. One on the outside and the other on the inside. They took them off and put new tubes in them for $84 bucks. I thought that was a good deal. They worked hard at it and they...

I may be the designated photographer for MVM at the show, working out the details with the editor now. Hey Mark do you have a tan 105 trailer cover?

Lets get a show of hands. Who will be there? I plan on being there Friday morning early with the Mule. Thinking about staying over or just driving back for Saturday.

I put a newer set of front tires on the deuce after I removed the rear drive shaft because the front tires were not wearing eavenly. While getting fuel after a 15 mile run on pavement at 55 MPH I checked all the bearing/hubs for heat. They were ok. I put my hand on the front tires and they...

Nice gear! Were you in NOLA for Katrina? How did you fare?

I think I will wait till jatonka gets his locking hubs back from the machine shop.

Any body have any adapters they want to sell? I need 2

So on the hottest day, today, I decided to address the 90W axle oil leaks on the deuce. Since I removed the rear drive shaft in an effort to prevent front tire scuffing the middle axles started to leak. The lug nuts came off easily with my 1/2" Milwaukee electric impact wrench. The bud nuts...

I have the smaller steering wheel on my truck. It works well with the air assist power steering. I believe its from the 900 series truck

Is anyone interested in buying a towbar with the round stock to mount it like this? I have an extra towbar and the round stock required.