Search results

I like chains

ContactJohn Tennis he has a few bolts left over

Do you have a square hole cover near the right side of the drivers seat? If so that will rule out an aluminum bed and the possibility someone converted an A5 to 4WS. From the date, it looks like you have an A5 converted to 4WS . Here is some information from Davids site M274 MODELS 11,240...

I picked up a set from Teds trucks, they were the one piece style. They have been on for over 6 months and no issues. They are a little more work to put on but if you repack your knuckles at the same time its worth it.

Did some PM yesterday changing the oil and fuel filters. Put everything back together and found the fuel pump was making its normal noise but no fuel was coming to the primary spin on filter drain. Pulled the fuel line from the top of the tank and the pump was running but not pumping fuel...

Met up with Mike today at Colemans. The scrapper has been busy since my last visit over 6 months ago. Lots of stuff getting cut up and alot of stuff is gone. Had the mule out there running for 2 hours before Mike came. About 500 feet into Mikes first ride it quit and would not start. David...

Here are the filter options all with anti drain back features Napa 1458 16 micron Hastings LF433 12 micron Fram PH 44 will advise WIX 51458 will advise

yes contact john tennis, jatonka on this site

This particular A5 mule does have 4 wheel steer. I added the 4WS option as an add on and it is the subject mule in an upcomming article I submitted to Military Vehicles Magazine.

Kenny its pissing out the radiator in the lower drivers side corner.

Well the radiator started to piss fluid before Aberdeen so I took it out and had it repaired inorder to bring the truck to the rally. On the way home same thing pissing fluid until the temp reached 200 degrees then it never moved. Once again out comes the radiator and back to the shop for the...

Do we need to keep the motor pool and the PX chat rooms? Does any one use them?

Nice job. I used an overhead ganrty with an electric hoist and trolley set up so I could drive under the ring and lower it down onto the legs. I also needed to turn the ring to line up the holes.

RE: Re: RE: bad luck today I can't even carry the 50 or the ammo in the trunk but it sure is a fast mover! Pulled the radiator dropped it off to get fixed. Had a new tube put in the tire for $42bucks. May look into getting the radiator re cored if it leaks again. This is the second leak in 2...

So I get out of the house early with the intention of taking MA DEUCE and the 1919 for a rIde to the range. Pull the truck out of the garage and the outside dual is flat. SOB. There is a nail in the tire. Get out the robo impact drive up on a board and change the tire. Load up the truck and...

I spoke to John last week he has 50 sets in production. This weekend is the MV show in his area and he is involved with the planning/running so we will hear from him next week

nice job with the camera! Thanks for the pic of my truck. I was running the mule when you took it

please post pictures when you are done for the guys that have not alteady spent the big bucks to replace the pump. I got pumped by the pump if you know what I mean.

good job Clinto

Home late on Saturday afternoon after changing a flat tire on John Dipasquale's deuce and loading tires and crap (priceless treasures) for a friend. Thanks to David Keone, we got the mule running again on Saturday morning after it backfired that morning and would not re start. He held class on...