Search results

For those of you that are not familiar with polishing, this is the same principle as polishing the paint job on a car. Step 1, take a wet rag and clean the windows Step 2, do only one side of the window at a time, heat is the enemy here, you will feel the warmth on the window when you start...

I used a polishing foam pad, you can't go wrong

Well, after reading about the Meguiar's PlastX , I fired up the Humvee and went and got a bottle, this stuff is great, I tried with a rag but quickly used my 3' polisher. I spent about 10 mins per window, I did the insides and out I took before and after pics, nearly every mark came off, I have...

It all depends on how crazy you want to go about it, you can buy and do some maintenance and have a really fun vehicle to drive. My recommendations would be: Research first, if it's been maintain or comes with maintenance records Find the vehicle that is the most complete for you, meaning, if...

I have 26 Grade 8 , 1/2 bolt holding mine to the frame Go to Tractor Supply and get some spares, most of them are 3" or 3"1/2 Bolt depot, is also good, get the locking nuts and buy 100 pack of flat washers, you will need them somewhere

This was online, you know what they say, "if it's on the internet , it must be true" LOL

For Grade 8 bolts, if you have Tractor Supply near you , they sell them buy the pound, great deal

Yep, my bad, I was certain that they would be bullet proof in order to protect our troops. The way I see it there's never enough protection for them. The current production Expanded Capacity Vehicle (ECV) model M1113 has a payload of 5,100 lbs. That is over 2 ½ tons, or very nearly the M1113's...

I did install the airlift bumper with the reinforcement, I think that I have 26 1/2 grade 8 bolt holding it to the back of the truck, I am short of the 2 shorter brackets going to the pintle , you would think that the bumper could pull anything, guess not. By the way , if someone has the shorter...

So, just asking, if a fully loaded Humvee comes in at 20K and can run around with all of that extra weight, and a de militerized is about 5,200, can't you apply the lost of the 15k to pull another vehicle ? Again, just asking...

Send us some pics, that should be an easy pull

I know , wrong indicator, sorry.

Check fleabay,

Nice write up, now I feel that mine was too short.

Like others have stated, the odometer can be changed at any time. Get a real oil gauge and see where that is going, mine usualy goes high at first start then goes to the 15-20 range once warmed up. The only way I know that mine was low milleage is that iI replaced the rear main oil seal, so I...

Thanks guy's I appreciate the feedback I have the tool on order, I will let you know how this "one more project" turns out

911joeblow Report Card - Cooling System Upgrade Short version, does it work YES, does make a difference Yes. so :goodjob: You can read the rest, any questions, feel free to ask, and yes I know that I have the Buba overflow tank, but mine is a toy not a museum piece I got my kit today, took about...

I understand that you are not in the mass production, that's the tuff part, you can get a set of four door on fleabay for a jeep under $500.00 What would be a ballpark figure for a set a four, any ideas, maybe we can post something for a limited run of doors and see how many would be interested...

For the top , you could always have it in two pieces, with tapered edges and use a really strong glue to put it together, I personaly would not mind a seem in the middle

Since we are talking about tops etc...I know that this will put me in the Buba zone, but I was thinking of building or buying a set of skeleton or pipe doors for my toy Has anyone seen these or would be intereted in buidling a set, something in this style, they are for Jeeps, but they would be...