• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. wreckerman893

    M936 Front Winch Issues

    One of our fellow members from "Down Under" (raeme) called me the other day and told me about an issue with the fair lead rollers cracking when winding in the winch cable under load....if you have any 5 ton with a winch you should clean the crud off the rollers and check for cracks.
  2. wreckerman893

    Medical "Study" on diesel exhaust

    At some point in time common sense must prevail. The EPA has done more to destroy small business in this country than any economic downturn ever did. Unfunded Federal mandates should be against the law. Until the states take a stand against big federal gooberment intrusion we are at the mercy...
  3. wreckerman893

    M916A1 winch operation while in gear?

    I drove a M916 for two years at Fort Benning.......to the best of my memory we never used the winch with the vehicle in motion. Since the winch is operated from a platform on the rear it would be difficult for the driver to operate the vehicle and winch at the same time.
  4. wreckerman893

    Medical "Study" on diesel exhaust

    This is the same outfit that concluded that marriage is the leading cause of divorce.:cookoo:
  5. wreckerman893

    Seats from nc to al transport

    Northeast corner of the state......just above Leesberg off of Hwy 68 on County Road 11.
  6. wreckerman893

    Seats from nc to al transport

    Is anybody in NC close to where the seats are going to the MVPA Convention this month? If you can get them there I'll take them back to my LZ and hold for thj327.
  7. wreckerman893

    WW2 Armoured Motorbike

    That's one baaaaaad motor scooter.:jumpin:
  8. wreckerman893

    Boyce Remanufactured 2 1/2 ton 6 x 6

    I love the flip hoods....I wish there was an aftermarket one available for the M35.
  9. wreckerman893

    M35A2 from GA to MS

    Standing by for the After Action Report and pics. :popcorn::popcorn::popcorn::popcorn:
  10. wreckerman893

    My Oshkosh Skidder (for a day!)

    He and Ellie Mae are sitting over on the couch grinning like a couple of.........................possums.
  11. wreckerman893

    Tank From Outter Space

    It may have been used on a range to tow targets.....when I was at Benning they had a remote controlled M60 that pulled targets on the TOW range......no turret on it either and it had extra armor on the side that faced the firing line....just in case somebody fired at the wrong vehicle. The...
  12. wreckerman893

    Tank From Outter Space

    damifino!!!!!!!!
  13. wreckerman893

    M105 Too big? think again

    So........would it would be a M52.5?
  14. wreckerman893

    My Oshkosh Skidder (for a day!)

    I.......CAN'T........HAVE........NOTHIN!!!!!!!!!!!!!!!!!!!!!!!!!!!!:evil::evil:
  15. wreckerman893

    Annapolis Road Trip Time

    In south Alabama it hotter than two rats farking in a wool sock.:roll:
  16. wreckerman893

    M932A1 Question

    Unless you want it to stick way out over the rear you might want to take the spare tire rack off and move the exhaust. That would put the bed a foot or so closer to the cab.
  17. wreckerman893

    Annapolis Road Trip Time

    You are going too far south......I'm about 35 miles north of I-20......I think there are more of "us" in the northern parts of AL and GA.
  18. wreckerman893

    M923A2... Common Issues/Review

    The short answer is no.....the 1100x20's were tube type tires mounted on the two piece split ring rims. IMHO the CTIS system was designed by an idiot after consulting with a group of morons.....way too complicated for a military vehicle and prone to leakage at every fitting. It makes changing...
  19. wreckerman893

    Bumber steps

    Many of them were made locally and added to trucks as an "Authorized Field Modification" but later there was a add on step available that could be ordered through PLL channels. There should be someone on here that can find the FSN for the kit......it was probably featured in PM Magazine which...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks