• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. wreckerman893

    She ran away

    here are pics
  2. wreckerman893

    She ran away

    Last week we had a cold snap in AL, it got down to 18 degrees, so I needed to add anti-freeze to the 816 wrecker. Since I had two hot batteries I figured there would be no prob starting even though it was already in the 20's with a frigid wind blowing out of the west. I cranked her up and she...
  3. wreckerman893

    M109A3 Restoration/Remodel

    I have a 109 that I bought to flip but it is beginning to grow on me. Mine has twin antenna mounts on the front. It has a bench installed in the front where radios were mounted. There is also a desk and small bench, padded with a genuine GI wool blanket. I have taken it to the local flea market...
  4. wreckerman893

    M813 re-power underway!

    Since my 816 puked it's 250 the other day I am looking for a 400 Comapart with 10 speed Road Ranger.....................THE RACE IS ON!!!!!!!
  5. wreckerman893

    Snow fun with War Machine

    What is all that white stuff on the ground????
  6. wreckerman893

    Bobbing an M818

    The thought of bobbing the M52 has crossed my mind but I need a 5 ton tractor more than a big bobber. I like the idea of power steering and huge tires......I'd have to lose the multi-fuel and put in a big cam 350 and 10 speed Road Ranger tranny. Now that would make the Hummer crown look.
  7. wreckerman893

    Ones that Rusted Away

    Idiots as described above are proof positive that the intelligence is being bred out of the human race at an alarming rate.
  8. wreckerman893

    Truck needs saved!

    If it is a deuce the axles will bring at least a grand from some rock crawler.Then there is the tranny, TF case and other stuff. If the sheet metal is good that's another couple hundred.You have to factor in moving it and can use that as a bargining chip.The good news is that scrap prices have...
  9. wreckerman893

    24v spotlight like those found on bridge trucks, wreckers

    I may be getting some in a few days....PM me with contact info.
  10. wreckerman893

    Semi Trailer move in Georgia...

    Ryan, I still have the M52 but it is S L O W.......but I may have access to a civilian tractor. I am looking at a semi-trailer located east of Hotlanta. Bidding ends today so I will know in a few hours if I got it. Wreckerman
  11. wreckerman893

    Here's what to do with your old NATO plugs

    Dragon...they are 24 volt..donno why they had that type plug on them. It can be cut off and whatever you want can be attached. They also have a fuse in them. Quarkz...that bed had a cover on it and they used that plug to get power for the lights they had installed on two of the cargo...
  12. wreckerman893

    M36A2 bed

    I just sold a M36. The wheel base is longer and the turning radius is bigger. The one side dropside was for loading missiles off and on the truck. That is what the M36 was built for...resupplying a now obsolete system.
  13. wreckerman893

    Here's what to do with your old NATO plugs

    Good way to recycle. I have several of the old slave ports with the two prong (prior to NATO) plug in my "have no use for but can't stand to throw away" pile. Maybe someone on the site has a use for them. But if you don't have the old end to reuse you could buy one of these from me. :) I...
  14. wreckerman893

    WTS Mirror

    I have some brand new west coast mirrors that I got from GL in a triwall. $25.00 each plus shipping Can PM pics if needed.
  15. wreckerman893

    M105 at Redstone Arsenal to MI

    I have picked up several items at Redstone and know the folks there well. I am picking up a 3/4 ton trailer as soon as the hated SF97 clears. I will be going up in the bob duece to pick the trailer up. If they will load my trailer in your trailer I can pick it up for you. I am 80m miles SE of...
  16. wreckerman893

    what does this wheel fit

    Sooooooo.......they are 10 bolt, 20 inch rims....were a military application....may have been stock rims on a howitzer and might fit on a 5 ton. The question is will the back spacing (or lack of it) affect using the rims on a prime mover. If they will fit a 5 ton I would love to have seven (got...
  17. wreckerman893

    Straight pipe on a NHC-250

    I have a straight pipe on the 816...it was done out of desperation since I had to move the truck quickly from where I was making repairs on it. It is LOUD and as soon as I get my federal bailout money I am going to put a muffler on it. If I can figure a way to do it I would like to have twin...
  18. wreckerman893

    what does this wheel fit

    Sounds like they might be good rims for a 5 bob ton project or to put bigger tires on a wrecker or other 5 ton.....if they are the right bolt pattern. Pics would be a big plus if you can get them.....if they have a custom application 20 bucks would be a huge bargain. I am close enough to...
  19. wreckerman893

    5 ton bob axle locations..

    MUST HAVE 5 TON CREW CAB BOB TRUCK :drool:
  20. wreckerman893

    M756A2 Pipeline Truck

    I was considering going 3k on it but then I remembered it was in the neather regions of the country where that white stuff falls and stays for weeks I kept myself in check. FT figured the miles for a recovery from my LZ at about 4200 round trip. As much as I would have loved to have it I: (1)...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks