• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. CMSGT

    Help starting 5 ton in DC for $100 cash

    These are the batteries I put in my truck and it gets pretty cold in Utah. Batteries: I had the military 6TMF but hey got weak and I decided to replace them, rather than spend $200.00 a piece (x4) I went with 2 centinnial C-8DH they are rated for 1400CCA so they are pretty close to the...
  2. CMSGT

    Help starting 5 ton in DC for $100 cash

    You can unplug the buzzer easily, its in the middle mounted to the firewall behind the dash. I use a block heater on mine and of course follow the cold starting instructions, it takes a while but she always starts. Theres also the ether way though thats a last resort. Nothign will work unless...
  3. CMSGT

    GAA What is everyone using?

    NLGI #2 lithium grease
  4. CMSGT

    Fuel filter # for M817

    Is there a conversion kit to make the fuel filter on a 5 ton NHC 250 a spin on? I have searched sseveral times and found the oil filter conversion and references to a fuel filter conversion but no part number or additional information. If its an easy find, and something I should have found in a...
  5. CMSGT

    Cummins cold start aid

    I had difficulties starting my Cummins too but installed a block heater (Cummins P/N 3310858) and she starts right up now. After sitting for 2-3 weeks in single digit/teen temps I plugged her in, let her warm up for a day and she started within 5 seconds of cranking. This was so much better than...
  6. CMSGT

    Accessory Questions

    Thanks Gunboy, I really appreciate your time and help. I just want things original if at all possible. What is "Memphis"?
  7. CMSGT

    Accessory Questions

    I have a few questions I hope someone can help me with. I have a 5 ton that I have been working on and there are a few things I'd like to add if its possible. Does anyone know of a snow plow kit that can be installed? I have places for accessories on the side of my truck, the drivers side...
  8. CMSGT

    Horn button rubber cap question

    Well I FINALLY gott that cheap kit to work, it took forever but everything appears to be secure and the horn works fine. I was going to take pictures of how it all went together but once I got it working I was afraid to take it back apart!
  9. CMSGT

    Practical uses for a Deuce

    I have a 5 ton, my wife bought it for me for our anniversary. We have property in the high country of Wy and are building a log home so it comes in very handy for hauling road base, pulling logs, taking out stumps, PLUS as an added benefit its wayyyyyyyyyyy cool and a great hobby. Up at the...
  10. CMSGT

    Horn button rubber cap question

    I guess the 5 ton has the same horn assembly as I have lots of springs, rubber doo-dahs and brass cups. I also have a rectangular rubber gasket that I have NO clue as to where that would go. I looked at the tech manuals but the assy is not the same. Atleast after reading this I dont feel so...
  11. CMSGT

    Coolant Filter

    I was searchign for a good coolant filter for an NHC250 5 ton but all I can find are filters for the deuce, would these filters be the same? Anyone have a good NAPA or Cummins part number fior a filter? Any help is appreciated!
  12. CMSGT

    How do you flush a deuce cooling system

    Any info on a coolant filter to use on a Cummins NHC 250??
  13. CMSGT

    Part Number Give Back

    I knew they couldnt use regular anti-freeze but for some reason it just didnt register until you said that, so thank you! Whats the best/easiest way to flush out the block/radiator? The truck already had the green stuff in it so I need to get it all cleaned out before I add anything else, I only...
  14. CMSGT

    Part Number Give Back

    Uh-Oh I didnt realize the info about the coolant...where do I get some that will suffice?? There were 2 adapter kits for the 250, one was horizontal and the other was vertical. From the drawings in the Cummins parts manual it looks like the one I ordered was correct. Not sure about the bolt...
  15. CMSGT

    2 batteries instead of 4 !

    I use 2 Centennial batteries C-8DH 1400 CCA and they fit in the box perfectly though the top holder needs to be modified. 1 of these batteries is almost the same size as 2 6TLs. They have ample power for 200.00 each.
  16. CMSGT

    Part Number Give Back

    I found them at a local battery store in Salt Lake City, I'm sure you could find a distrubutor in yoru area the mfg web page is Centennial Batteries - "Start with the best !!!" I paid 200.00 each and they really seem to work perfect!
  17. CMSGT

    Part Number Give Back

    I appreciate the info that people give me when asking for part numbers or other information so I thought Id share a few that I have gotten so far. I have the Cummins NHC 250 in my 5 ton. These were good numbers as of today, Cummins was not able to reference some of the numbers I got from search...
  18. CMSGT

    NHC 250 5 Ton performance

    Theres no black smoke, it seems to be running OK, Im doing all the filters now since I got it back down from the mountains. The tires definately make for an interesting road ride! I only drive it on the road for the trip in and out of the mountains for spring/fall or getting large supplies to...
  19. CMSGT

    FIlter part#s

    Thanks! Thats a great help!!!!!
  20. CMSGT

    Starter NHC250

    It was toast, I tried and tried to get it to start and I just cranked a little to long. It is amazing the difference in cranking with new batteries and a new starter!
Top