Search results

When I last ran my MEP-002 last year before my injector pump quit, the voltage output was fine then it quit having an output. Without moving any of the switches I tried it again twice with no output then my injector pump stuck. I finally got around to building an injector pump and got it...

My injector pump went out last year. When I had time to work on it I couldn't remember, when I remembered I didn't have time to work on it. Now that we have had some bad weather coming I made the time to assemble a pump and put it on. I aligned the PC marks and installed it. When I first...

I have been thinking about a way to utilize other glow plugs in the MEP 002 and MEP 003 Gensets. As most of you know, the glow plugs for the 002 and 003 obsolete. They are sometimes available for outrageous prices. The Glow Plugs for the Onan civilian version (CH41) are also obsolete. The...

OK guys, After searching for days for filters to fit my MEP002A, I finally found them at very reasonable prices. I got tired of using the Wix filters from NAPA. In spite of everything, the filters are not an exact replacement. The Wix 33113 (NAPA 3113) will work but the tangs inside the...

I just obtained a MEP002A 5KW Generator. I went through it and checked everything. Finally got it running, but occasionally the fuel solenoid does not open when trying to start. It is about a 50/50 chance that it will open when I hit the starter switch. Can anyone recommend what I might...

I just recently picked up another MEP002A 5 KW from GL that was listed as B4. This translates into "Serviceable, for issue condition". Yeah, Right! I went to pick it up and it looked really good, even had batteries and over half tank of fuel. The batteries are from 2004 and of course were...

I have a 5KW generator that runs well but can't set the Hz. I have a Kill-A-Watt and can set it with that but would still like to have the Hz meter work as it should. I know it is the transducer because I have installed a known good one it it works fine. Any help would be appreciated. Thanks, Ed

I bought a couple of the MEP002A Gensets. The last one had a stuck injector pump. When I bought the parts needed for the pump I had to buy them in quantities to get the parts I needed. I repaired mine and one for another board member. I have about 5 or 6 "O" ring kits that I have made up...

I have one of the MEP 002A Gensets that I have a few issues with. When I first bought this Genset I tried starting it only to find that the injector lines were disconnected. Further inspection revealed that the injector pump was stuck. I have a friend that has a MEP 002A that he suspected the...