• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. MrArmyAnt

    Okie - Spring Mud Run April 16th, 2011

    I'll be hungover but there. I just got my master cylinder in, and fuel filters, and will be out there installing them before I can go play. The river has water in it but getting stuck in it isn't like mud. I have a 40ft 60,000 pound air-force strap as well that's already out there. They...
  2. MrArmyAnt

    Insurance from Progressive

    Awesome! Do you have a phone number? I'm currently getting a quote from FB and Gulfway as well. FB wants all my vehicles and won't do just the deuce, but USAA's prices have been out of this world recently. Anyone ever filed a claim with FB? Any experience?
  3. MrArmyAnt

    Okie - Spring Mud Run April 16th, 2011

    On the other side of the bridge from purcell, on hwy 77. 20 minutes south of Norman, OK, about 2 hours and 30 minutes from Grapevine, TX, depending on how you drive...
  4. MrArmyAnt

    Bolt hole pattern on floor

    Why are there red holes on passenger side? Odd.
  5. MrArmyAnt

    Insurance from Progressive

    They progressive website did a quote on it as an agriculture vehicle since it spends most time at an offroad park. Asked for year value and a hand typed make and model and insured me. Confused I called in and I told the lady the vin and specific model and they insured it for 176 for 6...
  6. MrArmyAnt

    Okie - Spring Mud Run April 16th, 2011

    So any other deuces going? If someone has a tow bar and wants to tow me 15 minutes to norman I'll buy you a case of beer :) I'm not insured and barely outside the 30 days. I just don't want to be pulled over on the back roads getting it home.
  7. MrArmyAnt

    Bolt hole pattern on floor

    Thanks. If i compare it with the attached and use trig i could figure it out but I'd rather it be a bit more exact than that. Is the 8 inches the distance the front bolt is from the back or from that part of the door sill or to the outside or what?
  8. MrArmyAnt

    Bolt hole pattern on floor

    If you dont mind! separation of the seats would be good too. I'm building a sort of bnch that holds two suspension seats and a center console deal.
  9. MrArmyAnt

    Bolt hole pattern on floor

    What are the dimensions of the bolt holes on the floor for seats? I have the interior dimensions and my deuces is an hour away with dining chairs as seats. Trying to get something together with my suspension seats that will work before I head out there this weekend.
  10. MrArmyAnt

    starts and runs for a while then dies and has to sit...

    I'm going to buy one set then sell some organ I don't need and get spin ons :)
  11. MrArmyAnt

    starts and runs for a while then dies and has to sit...

    So glad it's sounding like it's not the pump. I'll get new filters so I can drive it at the offroad park its parked at this weekend for the Okie run, then drive it home for the draining of everything.
  12. MrArmyAnt

    starts and runs for a while then dies and has to sit...

    Like title says, starts right up, drives fine, then after a bit doesn't seem to get any fuel. I thought fuel was below fuel pickup, and by the time someone got us fuel to the offroad park to fill it up, pouring it in it would start. finally pissed after putting in 30 gallons and realizing...
  13. MrArmyAnt

    Okie - Spring Mud Run April 16th, 2011

    Oh and on a side note I hope it rains. There is water in the river that's **** shallow and everything else is a dry dust bowl. We go out there with the SAE Mini Baja Team for OU. Bring wallets and donate to a collegiate event :)
  14. MrArmyAnt

    Okie - Spring Mud Run April 16th, 2011

    Hey all! I have a red deuce being stored in lexington at sundog. know the owner and he said you all were coming down. Maybe someone can help me with my fuel issue (either fuel pump is dying or filter is full of crap) so I can drive it home to norman and get my bob on :) Also my garage is in...
  15. MrArmyAnt

    HEMTT M977 Valve Stem for Tubes

    Bump? Tube tires on the hemtt wheels? I have a tire that doesn't hold air too well from a small cut and was wanting to put a tube in it until I can find a replacement.
  16. MrArmyAnt

    Help Identify these parts...

    Yeah but the actual lever moves freely and doesnt feel attached to anything, and I def. have an air in / out switch that puts it into 6x6.
  17. MrArmyAnt

    Help Identify these parts...

    What did this airline looking thing go to? Also what did this lever on the back of the transmission go to? What all is missing from my parking brake?
  18. MrArmyAnt

    Any Deuce owners in HI?

    The streets are a little trashed down by harbors. And the water where I dive has a bunch of sand and crap still settling. Luckily we weren't hit all that bad. Still quite an interesting thing to see! What Type of ship is the Abraham? I have a marine buddy on one somewhere and another buddy...
  19. MrArmyAnt

    Any Deuce owners in HI?

    Here's a pic... Buddy wanted a weather update. I don't know why, it's almost always the same, awesome...
  20. MrArmyAnt

    Any Deuce owners in HI?

    I'm out here for 11 days and considering jumping out here. Wanted to know if there were any good ORV trails and such out here before I commit... One thing I don't think I could handle about island life is not being able to play around on at least a 4x4, preferably a 6x6 :) I'm in Honolulu by...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks