Search results

Whats the part number for the fan thermostatic switch? Thanks. Think mine isn't working.

Installed two H4 high output headlights. Bought some Packard connectors to use the oem plugins.... It's brighter.. The first picture is inside the headlight bucket with original wires to oem headlights.

No kidding. Sometimes I feel like the blind leading the blind....

Here you go. Not sure if they are worth a damn but I'll give them a try. These have 24v bulbs in them.

Yes, they are 7". I also bought Packard connectors so they can plug into the oem wiring plugs...

All figured out. Red is hot, yellow is low and blue is high beam. Tested it on a 12 volt battery. The headlights are 24 v.

So, using the same orientation of the stock headlight the plugs in the brighter headlight would be yellow=91, blue=18 and red=17....Yes.

Everything seems fine the GP wait light will cycle for a minute or two after a cold start and then stops. Truck starts immediately...:)

When the wait light cycles the volt meter drops. From what I have read that indicates the glow plugs are jacked..... I'll replace them and see what happens...

My wait light didn't work... I could hear the relay click inside the EESS and the light would flash for an instant...... never acted normally. I bought a new EESS 12446779, 6110-01-395-9585 and a new glow plug temperature sending unit 12338772, 2920-01-175-7214... and a wait light... Installed...

Do the centramatics really work well?

Installed a backup light on the M998, with the pressure switch added to the gear shift selector...and it works!!! Also adjusted the handbrake and it now holds it still.... WOOHOO. Also out n a new EESS module.

I took my M998 to a large 4x4 shop for a balance. I wanted weights attached to the wheel. He called and said the wheel/tire started to shake his balance machine so much he had to stop. Ended up putting beads in the tires. Not impressed so far with beads. Feels OK then next time I get a bad shake...

What do you use to break the tire bead?

Which number is for the rear axle,, if you recall. Are the rears 27.5" long?

The fuel line hoses that enter and exit the fuel filter/ water separator on the M998.... The inside diameter ID of the supply house and the ID of the smaller exit hose????? I'm assuming the supply house is 3/8" ID Trying to plan for the filter relocation. Thanks.

Any idea what the name/style of the rubber plug ins are called? It would be nice to use them to connect the new headlight connector to the existing plug ins. Thanks!!!((

Thanks guys!!!!

I got a pair of 24volt high intensity headlight units 7" diameter. The three plug ins are in a upside down pyramid shape... Upper left, Upper right and bottom. Wondering which one is hot, low and high beam. Thanks.

I understand the cargo partition divider keeps objects in the "bed" of the HMMWV from flying up into the passenger compartment if you stop suddenly.... However even if you seal the bottom and edges with, say silicon, rain water could still get into the passenger compartment because the rear...