Search results

Kascar also has a tool available @ $65 https://real4wd.com/store/Glow-Plug-Removal-Tool

There will no longer be bargains to be had. IP has successfully squeezed the price up on most commodities. There will be no more $25 lots like there is no $100 trailers anymore. Everything will be retail priced. I am afraid I don't see any good news in this announcement......:shock: Since they...

Ditto and Bingo. There is a current relatively newer RTV specifically for Gear oil. That is what I use for axle gaskets and differential covers. Has not let me down yet.

The truck uses a standard radiator cap so I would recommend going to Auto Zone or O'reilly and using their loaner tool coolant system pressure tester. Crank up to 15psi and find the leak(s) I personally on any application calling for a cork or paper gasket use RTV silicone instead. They now...

It is a common problem with the 1st generation gaskets. When used with Gas or contaminated, they swell breaking off the retaining ring for the gasket off the flange. Use a Viton gasket. End of problem. I get my Scepter parts from DS tactical in Canada. They carry the full line including color...

Technical bulletin installation of crew ii modification kit 19207 – 12498026 for carrier, personnel, full tracked, armored m113a3 2350-01-219-7577 (eic aey)

I have it thanks! I downloaded from here: http://www.hmmwvinscale.com/HMMWV%20TM%20%20-24P.pdf I tried to upload but the board software parameters must not allow a file this big.

It is a huge file! 35mb I tried to upload here but it choked on the file :-(

I would suggest checking the orings at each hose connection. I suspect you are sucking in air somewhere. Which o ring did you change? the one at the hose fitting on the pump? If so duplicate your efforts at all the fitting ends. Several members have had this issue due to orings.

this might help. Look at ARMY TM 9-2815-237-34P 6.2 & 6.5 parts https://www.steelsoldiers.com/showthread.php?101806-6-5-tm-s

:-) I have accumulated some tid bits. Check my list in the classifieds as I keep adding more treasures to the list:tank:

Try 98G as I think he had one. Also search 24v compressor on epay. Look for v belt and same style mounting as the sanden mount is pretty standard configuration.

try Greg 86HUMV

Maybe take the rear one and move forward as you really don't need it unless you are leveling the trailer. Also, One jack is strong enough to hold it up. I know we called Utility tool and got a crazy quote. Maybe they are not as proud of them now: http://uttwi.com/contact.htm My 2 rear legs were...

Is the leg missing or still there and the lock pin bent from someone moving it while still fixed? My XM-1073 (same as m-1061) had 2 missing/bent pin with handles and Goldneagle made me 2 to salvage the legs. We had called the manufacture and got some stupid crazy price...

tailgate upgrade Picked up a new tailgate 12338981-3 in a mixed GL lot. Thanks to Garret~Jeepsinker and Wes~ Simp5782 for picking up and relaying it to me. This tailgate is lined with extra holes on the inside to mount the plate that holds the max ax or the thicker heavier armor plate. Not...

front pump seal would be my first instinct.

See this thread on differences for 12 v on regulator and wiring: https://www.steelsoldiers.com/showthread.php?173373-Hmmwv-charging-problem

Sorry, Can't help with that. All the best.

Congrads and welcome to the addiction! Truck looks great! The holes are for the offset antenna mounts though you have an extra 2 on the back rear, I am not sure for what? Blackout light could just be the bulb. If your light is toast, I do have a tan led version in the classifieds.