Search results

Check out tractor supply. They sell ones with a built in bottle jack. They are awesome and adjustable height arm with pin. Super nice feature is that they also have a safety latch in case of failure. Makes regular jack stands and bottle jacks obsolete imho...

I also wandered as I have long strips vertical on the front inside passenger foot wells and had some velcro residue on old tailgate.

Lots of time it is the carc overspray paint that is cracking on wires, not the wires. Can't really tell if those are oversprayed?

thanks for the input. Just picked this puppy up and plan on using on my hmmwv.

found this tip on the web and it makes sense to repair the post with this method...if the battery test ok with voltage and hold load. http://www.buggiesgonewild.com/battery-terminal-repair.php NAPA will carry the ends in Belden but the issue will be is it a jobber (indep) store with smaller...

Looking for help in determining what model this antenna is and What applications is was used For? Happy New Year! :jumpin:

Csmdavis Jeff had a bunch of seat cushions. Send him a pm

My display is a m16 training rifle (marked from Ft. Benning) not the rubber duck. It has some real parts. I got it off craigslist in Panama City Beach. I put the orange duct tape on the barrel to hopefully show it is not real. I carry it in a bag when driving and only mount when static display...

This is the older original style. The swiss cheese bracket is newer.

I suspect you will find the water pump shaft with substantial slop on the impeller shaft when it is pulled. That imbalance probably cooked your fan clutch or was enough to cause the fan to fail or the shaft of the pump cracked and launched a missile. I am afraid all the problems will track back...

I have pictures of the front in my thread Juan's M998. I have not yet taken pictures of the back. There is a block that mounts to the B-Pillar sideways using 2 of the b-pillar through bolt holes and the clamp with bracket bolts to the block. I think the originals were designed for the m16 rifle...

Cross reference guide for Radio/Comm cables from A320XXXX to CGXXXX or CX13XXX & NSN This cross reference shows NSN and the part numbers using the A320XXX series numbering or CG-XXXX or CX130XXX numbering systems. Might help to id cables as they can be labeled with either part numbers...

Vic 3 Intercom -10 Operator's manual -20P parts manual

My replacement came in today.

The bracket mounted on the frame cross member is slotted. Try loosening those bolts and adjusting?

on the air lift bumpers, the catches are on the braces and not visible from outside. The rack needs a different 45* bracket for the latches which kascar sells. Do you have the original rear slightly curved bumper or the upgraded flat MWO towing upgrade bumper? Either one of those should also...

Outstanding 🎄

Thanks for the info. I do have the bumpers on the frame just no loops.

I was curious as to their function? My 2 hoods don't have them or show holes.

It does not look like any of the mounts I am familiar with. I would als o lean to unit made, maybe even some other purpose than a brushguard?