• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. NDT

    Does a Caiman C9 acert fit in a FMTV?

    There were two versions of the Caiman, the first was based on the FMTV M1083 and has the C7. Then BAE came up with the (awful) Caiman II which has the C9 along with independent suspension.
    • NDT
    • Post #3
    • Forum: FMTV
  2. NDT

    Air compressor no air above 30 psi

    You are sure no air is coming out of the dryer sneeze valve when the engine is running?
  3. NDT

    Air compressor no air above 30 psi

    Can you hear any leaking after you turn the engine off?
  4. NDT

    HMMWV Rocking

    Get H1 Alpha geared hubs with helical cut gears, that fixed the issue.
  5. NDT

    Fuel water separator question

    Should be finger tight when you re-tighten it. The part is plastic so go easy on it if you use tools to loosen it
    • NDT
    • Post #4
    • Forum: FMTV
  6. NDT

    A/O pump ..whoosh and thump ?

    Where is the cover plate? Rain will enter without it. Sounds like the pump is stalled.
    • NDT
    • Post #3
    • Forum: FMTV
  7. NDT

    Who got the GP M-47 1790-7B Engines

    Out of curiosity, what are your plans for these? Jay Leno already has one …
  8. NDT

    1st Deuce

    Are you sure??? your wiki reads: "Green Valley is an unincorporated retirement community composed of 59 Homeowner Associations. " Hate to be a party pooper but this HOA nightmare comes up a lot on this board.
  9. NDT

    1st Deuce

    Whoa, if your HOA won’t go for a 6x6 deuce, they SURELY won’t go for a 4x4! They will consider it a commercial vehicle and make your life a living hell. Each letter they send they will bill you $75 or some such stupidity.
  10. NDT

    M1079 Rear Stairs

    They have to go motor freight. I would guess stairs and pallet at 100 lbs.
    • NDT
    • Post #5
    • Forum: FMTV
  11. NDT

    Who got the GP M-47 1790-7B Engines

    I'll never forget opening about 30 cans with AOS-895's in them looking for a good one. All had holes in the block. I learned long ago that the Army puts the bad engine back in the can when doing swaps. Wasted two days. The 895 goes in the Walker Bulldog and the Duster.
  12. NDT

    Turbo Options 6.2

    I don't know which turbocharger for the 6.2 whistles, but I can tell you which does not: The GM8.
  13. NDT

    CARNAC's Historical VIN INFO Thread

    If you look back on page 1 of this thread, you will see that unfortunately no 887's were queried while the database was functional.
  14. NDT

    M936 Seized Fuel Cap

    Tap the cap gently with a hammer around the threads.
  15. NDT

    Have your CAT had its Asphaltene today???

    E85 ethanol gas appears to cut it. Now to get all these chunks out of the tank.
    • NDT
    • Post #11
    • Forum: FMTV
  16. NDT

    3 year start up maintenance

    What I do is pull out the engine stop and then crank for a while to pre lube.
  17. NDT

    3 year start up maintenance

    I suggest you reach down into the fuel tank and see if you have 1” of nasty at the bottom, if so clean it out.
  18. NDT

    Possibly acquiring a M931A1. Feedback..?

    It’s a rolling identity crisis!!! Fortunately nothing a cutting torch can’t fix!
  19. NDT

    M1102 cracked drawbars at A frame

    Not good. Have someone TIG it up for you? Wonder how uncle managed to do that.
  20. NDT

    Need opinions

    Usually I can make sense of these markings but not this time. Keep sanding.
    • NDT
    • Post #2
    • Forum: M880
110,872members
165,307threads
2,326,123posts
2,048online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks