• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 86humv

    What antenna do I need for 450MHz?

    I have a AS 3449/vsq-1, and a AB 1284/vsq-1 available.
  2. 86humv

    What antenna do I need for 450MHz?

    You hanging from a tree on that shot ?.....oh...thats right ...no trees out there.
  3. 86humv

    How to identify if m998 was rebuilt buy gov

    I have some uesd plates...11/98 =183xxx, 05/99= 184xxx, 01/00= 187xxx, 02/01= 193xxx, 06/01= 195xxx. 06/02= 201xxx...and so on.
  4. 86humv

    What antenna do I need for 450MHz?

    I might have one of those AS-3449 available
  5. 86humv

    Hmmwv radio tray question

    Upper tray
  6. 86humv

    Changing fluids on cooled differentials in my 1165

    1165a1 has radiator coolant also the transfercase is cooled the same ....There is a small heat exchanger inside cover....so you should not be getting radiator coolant when you open the fill, or drain.....Might have internal leak.
  7. 86humv

    Lubing the speedo gear (red gear) question.

    No...but same stuff.
  8. 86humv

    Lubing the speedo gear (red gear) question.

    Gets it lube from trans fluid.
  9. 86humv

    Turret Support Pillar - M1045/6

    . That wide overlay roof comes off, and there is a standard aluminum roof under that,,,,that one in the pic shows an adapter ring for a 1114 / mrap bearing which is easier to find....but I bet that 36 hole ring adapter will be removed.
  10. 86humv

    Turret Support Pillar - M1045/6

    Thats a 900 series truck turret...but turret less square plate are Hmmwv..
  11. 86humv

    O ring for 12 bolt wheel ?

    Old 12 bolt has a bigger diameter Oring...groove is bigger, late 12 bolt and 24 bolt use red coated skinny Oring....small groove.
  12. 86humv

    12” Brake Caliper Driver Side Install Help me please~

    1165 is the same as a A2 frame wise...unless you have an 1165A1, 1152A1 Rev which has different rails, brakes, Etc...
  13. 86humv

    slant back gas struts

    Gamble...you getting these ? Another guy wants them.
  14. 86humv

    slant back gas struts

    Zip code please.
  15. 86humv

    slant back gas struts

    Mine are good...all 4 , $ 100 plus shipping. You will need 4 ea. clip retainers p.n. 12339617
  16. 86humv

    slant back gas struts

    I have used sets available.....not junk like those other guys.
  17. 86humv

    slant back gas struts

    You only got half...and they look bad.....you should have 2 long, 2 sort shocks, and 4 green tubes...2 of which will slide into the other 2....and if dented...they may not slide in.
  18. 86humv

    ID weird top?

    Its just a standard Amtech helmet top with added vents....probably had electronics in there.
  19. 86humv

    slant back gas struts

    Those shocks at Eastern are only half of what you need....there part numbers are lowers only but pic is of an upper. Upper tube has sticker only Upper and lower cylinder are different length. Lower tube slides into upper tube.
  20. 86humv

    Reed switch fuel sending unit

    Someone years ago told me on the float-less type...They carefully drilled the tiny fuel inlet holes bigger to allow fuel to go in and out faster, and it worked better.....I have a bunch of them....maybe I'll try it some day.
110,879members
165,313threads
2,326,213posts
2,083online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks