• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. steve6x6x6

    Oil seal mod. for 3053 input shaft

    Yes there is one left.
  2. steve6x6x6

    FMTV Highway Speed

    They had 1000's 2 1/2 years ago, i heard a couple of months ago they were down to nothing.
  3. steve6x6x6

    Oil seal mod. for 3053 input shaft

    There are 2 left, $220.00 ea. + the ride. Now it is down to one.
  4. steve6x6x6

    M1078 LMTV planetary hub setup

    All of my meritor axle builds for off road use I have removed the CTIS seals to lube both wheel bearings with the gear oil. The seal will keep the oil in the hub, but the opening in the spindle for the air supply must be plugged at the spindle flange, or oil will come out.
  5. steve6x6x6

    M1078 LMTV planetary hub setup

    The 2 seals for the CTIS are rated at 175 PSI. The inside would have the vent but that is inner side, that oil would run out of the bottom of the steering kunckle.
  6. steve6x6x6

    M1078 LMTV planetary hub setup

    Not sure how the oil in the outside part of the hub i getting past 2 high pressure air seals into the inner part and get by of a premium hub seal. Oil can go down the spindle bore and get by the one seal on the stub axle hub.
  7. steve6x6x6

    M1078 LMTV planetary hub setup

    On the spindle nut socket. OTC PN# 1913-GOV This was made for the motor pool.
  8. steve6x6x6

    Oil seal mod. for 3053 input shaft

    Ok, finial pic's. I spot faced the bolt holes and installed the seals. The first one goes out Monday for silverstate55.
  9. steve6x6x6

    Oil seal mod. for 3053 input shaft

    A little deburing and polishing and install the seals. Will be ready to go out Monday. $220.00 ea. + the ride, let me know.
  10. steve6x6x6

    Oil seal mod. for 3053 input shaft

    Step three has been done, now on to the finial step.
  11. steve6x6x6

    Mrap axles on a Deuce?

    If your going to do that, do it right, use all of the meritor stuff and use just the rockwell top load chuck.
  12. steve6x6x6

    Oil seal mod. for 3053 input shaft

    OK, step one: Cut the 5" shaft and the 2" DOM, machine joint and weld. Step two: machine out the back side. Step three : will be machine out the front side. Step four: Drill the four holes and machine the oil slot.
  13. steve6x6x6

    High Speed Gears vs. Detroit-style Locker ... difficult decisions to be made

    Why do we need another thread on this topic? There two already that cover this.
  14. steve6x6x6

    Oil seal mod. for 3053 input shaft

    I wanted to post some pic's of the weld joint.
  15. steve6x6x6

    How many need a Detroit locker for LMTV ?

    My product line is Meritor only. There is no interchangeability between the Meritor and axletech 3000 and 4000. You would not like the ratio.
  16. steve6x6x6

    How many need a Detroit locker for LMTV ?

    300 HP from an 8.3 may seen like not much HP, but 1,000 RPM is 600 -700 foot lbs. of torque. You are getting there.
  17. steve6x6x6

    How many need a Detroit locker for LMTV ?

    Everyone with big HP have found out that the axletech 3000 and 4000 are junk. Broken sun gears, broken axle shafts.
  18. steve6x6x6

    Oil seal mod. for 3053 input shaft

    I ordered the 4 seals today, with the seal installed looks like $220.00 ea. I went with seal # 481163
  19. steve6x6x6

    Oil seal mod. for 3053 input shaft

    They are pulling me apart on the FMTV board, i can not do everything that everyone asks for.
  20. steve6x6x6

    How many need a Detroit locker for LMTV ?

    Contact info. to buy LMTV lockers. Chris Boudreau at Southern Customs, in West palm beach, FL. 561-308-0490 price $795.00 each. I do not have the time to retail these. If you want to see what i do, go to Facebook and search : Differential eng. inc. stroll down through a couple of years.
110,897members
165,315threads
2,326,234posts
2,135online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks