Search results

I may just do that. The front bumper is coming off as well. The original is tweaked.

I will be using quite a bit of the Donar. Planning on moving the air shift and I need some of the dog bones as well. I may purchase those however. Another member wants the bed.

It runs, smokes a lot,burns fuel like it's going out of style, other than that its fine. the cab needs replacement as well so all things a2 are going into this truck including the air shift axle.

Here is mine. Have had it since 1999. Still need to paint the top. Too hot for doors in the summer. Maybe I will add AC

Here is a picture of the m108 and the Donar truck.

M108 deuce wrecker gas to multifuel swap Decided to start a new thread for this instead of continuing the hi jack of Kenny's thread were he did the same. Finally started the swap today. Please chime in with any pointers. the engine is ready to remove but the sun went down to fast .

Finally made a little progress. The old motor is ready to come out. All disconnected but it got dark before we could remove it. My plan is to go ahead and remove the cab as well.

Subscribed

By the way Robins only has one b

I live in Warner Robins ga. What do you need?

essentially the same aircraft.

It's a weighted tag not a commercial plate.

We use to just put a tarp over it. It actually says this in one of the ps mags or TM supplement.

I don't think those markings are original. The font does not look correct and it has had paint work. But who knows You should post up on the g503 and g838 where the real experts are.

It's not a plain 151. You have the hole for the black out light over the right rear tail light . No oval floor drains and a budd body tag. Footman loop is missing on the driver side where the curtains would tie down. In front of the rear wheel wells on the outside of the body opposite of the...

Can I bring my own truck to drive or two?

It's not a plain m151. No oval floor drains. Looks like some body work/ bondo . Missing footman loops

you should go to the g503.com m151 section or g838.com and post your questions and pictures.

You can make them work with slight machining. It has ben done

For a first vehicle I would say neither.