Search results

Looks sharp.

Looks good Justin. I can't even get time to drive mine lately. I'll just enjoy pics of you enjoying yours. :driver:

i got my client to do an RV A/C on top for their LMTV. it's powered with an inverter, what was the determining factor for you to use a generator? Did you cut the original covered or manufacture one? yours looks good. Dave

They came with my HEMAT trailer I think, and one set came from tractor supply. I may have a long whip antenna. I ordered some for a client and had an extra. It's like a 100" whip or something. I can find it and measure. If you're interested PM me. I don't want to make this a classified but would...

I used a base load CB antenna. I took it apart (it was an old one) removed the winding off the oil, soldered a new wire straight through to contact the whip and painted it black. Only about 4 feet tall but works awesome. It matches my functioning CB antenna as well. I thought I had pictures to...

I've been wanting one myself. Do you have a supplier you can share? Thanks, Dave

Not anything specific, the MK's seem to be a limited item. So any part is welcomed. Lol

I found this a while back but I hadn't got to verify any of it. Maybe it'll help someone out and let us know. Dave

Save the MK48 leftovers. One one us MK owners may need em. Keep us up to speed with your progress, and pictures. Dave

I made a raised hitch for mine (M1102) to tow it about level. I lowered the tire pressure a bit. With the topper I made (about 800lbs) I pulled it from WV to Texas and back. 3400+ miles round trip. No problem at any speed. It tows likea dream.

I watchedthisvideo earlier elsewhere. The first thing I noticed was the rear of the trailer partially off the road. More than likely the tractor pulling the load cut the curve too short pulling te right rears off the road and starting them downhill. This made it impossible to back up with te...

Do you have a few pictures then?

Minions rule!

I got my first just a little over a year ago, an LMTV, now........the LMTV, MK-48/14, M1070 HET, two M931A2's, to HEMAT trailers, two M1102 trailers, M105A2 and an M1082 trailer. It's hard to just say no! Dave

You'll need to get some serious weight on the rear axles first. Then I'd lie to see it for sure!

Interested. Keep us informed. thanks, Dave

One of my M931A2's one day wouldn't do anything. I thought perhaps something was left on and drained the batteries. I charged them but they weren't dead. Upon further investigation it turns out the battery disconnect switch on the dash seems to be bad. You can wiggle it back and forth a few...

I have an MK48/14 combo, the 14 I believe is 16,000lbs empty. The height of the 14 is also very tall to load an excavator on, about 5 feet. The capacity of te 14 is plenty. I have an M1078 and an F-450, the capability is more than likely there to do the job, however Ford puts it in writing...

5.56 blanks? I'd cut em down for Blackout's. I can't ever find nuttin nice. Lol Dave