Search results

Why don't you list both that way anybody else looking can find them. Sent from my SM-G900V using Tapatalk

And do any of you great guys know the actual stud length or part number? Sent from my SM-G900V using Tapatalk

What size are the lugs for the 1008 trucks? 9/16 or 14mm have looked and searched but no joy. Sent from my SM-G900V using Tapatalk

No the replacement dash pads were mostly gray have seen a few off colors. Sent from my SM-G900V using Tapatalk

I know that y'all are still looking at additional air from pumps but I have added extra tanks to a M35 before and I don't remember if it was one or two but I believe it was two that we added. We took the tanks and mounts off another m35 and turned the mounting around 180 and it installed with...

Yeah here are some of my heard. Only about a quarter of them! Sent from my SM-G900V using Tapatalk

It has some issues if I remember right but I am going to make a long wheelbase wrecker. Using a 927 frame to start with so effectively stretching the front part of the frame. But I have some wild ideas. Sent from my SM-G900V using Tapatalk

Use the hydraulic motor off a 936 and it will all fit, must change the sprocket on the winch also. Will get you picture tomorrow if can remember. Sent from my SM-G900V using Tapatalk

All you need is the bridge truck spacers and wheels, 95% the axles are the same. Sent from my SM-G900V using Tapatalk

They won't care and it shouldn'tbe past the end of the hub, and has been done for years on bridge trucks. Then pay about 5000 for un-needed metal. You do realize the wheels are about 1/4" thick right? Think Simp looked that up to come up with his 6.65" spacer measurement. Sent from my...

I also have a different idea if y'all can blow holes in that one. Sent from my SM-G900V using Tapatalk

Okay couple things, 939 and 809 axles are basically the same as to what wheels fit so just get the bridge truck setup, bang done. But if you want to use the combat wheels then just bolt on the inside set then a 6.65 spacer then outside wheel. And as to the spacer make it hollow and use normal...

Okay let's play devil's advocate for a few minutes. H1 Hummer is a street legal version of the humvee so what are the actual differences? Padded dash and what else? And is there any reason (not saying that you should )that you can't bolt on these pieces and have a completely legal humvee? Get it...

Okay check58 so if you need it I can come up and help out on some of your problems where exactly are you? Starkville? Thought y'all had lot's of cow bell engineers up there? But hey if you don't mind a USM alumni working on the truck I would be glad to lend a hand. Sent from my SM-G900V using...

Okay Pipeliner I am not jumping on you as I see you are new. But you need to start your own post about your new to you baby. And once you get that going give me call I have most off the BII you are missing from the wrecker. Sent from my SM-G900V using Tapatalk

Heck I thought you being the Trailboss you would know better than anyone? Sent from my SM-G900V using Tapatalk

I'll give you 100 dollars. Sent from my SM-G900V using Tapatalk

Hey 71DeuceAK where exactly are you in Alaska I have a couple of good friends up there one in Anchorage and one in Palmer, both military guys and might help you find what you are looking for local. Sent from my SM-G900V using Tapatalk

Okay one thing that needs to be cleared up around here is the EUC, it is used to prevent sales to enemies of the USA. It doesn't say you can't sell out of the country but you have to tell if you are going to. It is giving the federal government a paper trail to hang you with if you sell a...

I doubt it had much to do with the CUCV sell off most were way past needing a rebuild or reset, now that being said I think that is what should have been done I believe that the Chevrolet CUCV could have been rebuilt cheaper than buying new replacements and would have still been a good...