Search results

I have several welding supply places by me. All will do exchange but only one will fill a customers bottle. Very few welding supply places actually have the equipment to fill bottles. This is due to fire and safety issues and regulations. You may have to search for a fill station

There are multiple torque converters for the allison. You should really have allison diagnose the problem

I would not worry about the DMV I would worry about the DOT A tractor protection valve is required.

They are slow trucks. Only 250 hp, 5 speed allison, gearing, and tall tires. They are not the 400 or 500 hp trucks of today. They do not drive like your car or light truck and they can not be driven that way. That being said there are several checks that can be done to see is the transmission...

DOT requires 3 full threads past the nut or it is out of service

The electric guns are so fake compared to the co2 powered M60. The co2 powered M60 is a blast

75,000 on three axles is not street legal. You have to follow the bridge law. Simple answer is 12,000 on the steer and 34,000 on each pair of axles for a max of 80,000 for 5 axles. They do not rate class 7 or 8 trucks for GCVWR like they do on pickups A lot of it depends on the hitch and...

Budget cuts

Flying blue pop ups, that is priceless Not the first time

Have you fist tried releasing the truck parking brakes then do the the trailer brakes.

But who else on the block has one

The reason a lot of people want such huge generators is they do not understand power management. People just add up the breakers or appliances that they want to be able to use and do not understand that most due not run continuously. The second issue is people do not understand balancing loads...

80 MPH speed limits are here. Nevada just became the 15th state to authorize there highway department to set the speed limit at or above 80 MPH. You can be ticketed for traveling more than 15 mph below the posted speed limit unless you have a Placarded or permitted load or for weather...

Can you provide some information on the ramps How long are they What size is the channel and angle treads

I am having trouble separating the sections on the fuel hose and separating the hose from the tank. Are there any tricks? When I rotate the sittings it feels like the locking paws are not letting the fittings rotate enough to separate

Do you have any pictures of the MRAP seats you have? I am interested in two drivers and the flip seats and or two gunners seats

The are two designs of condensers out there. One works great for R12 but is not optimum for R134. The other type is optimized for R134. The bigger condenser is better to a point. Airflow is just as important for the condenser to function properly The only real issue with changing the...

Pretrip before every run. Full DOT inspection and brake adjustment once a year or before every major trip. Check all fluids. This is for a truck that was just restored and everything was serviced, rebuilt, overhauled or replaced. Also full inspection after any water crossing. Civilian...

If you do not know what a caging bolt looks like or what the COLA test is you do not have the necessary training and knowledge to safely operate this vehicle. You need to learn about this class of vehicle and how to do a pretrip inspection before you operate it. These vehicles are not like...

I was thought to downshift a truck to a stop. But then again I was hauling max, permitted, overweight loads at an early age. What fun it was to have a three axle truck running at 60,000 in all types of weather, no AC and unsprung walking beam rear suspension