Search results

Enjoy!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 🛳

99.9999999999 % of problems rarely fix themselves. You might have gotten something that least little bit more tight and it fixed it. But, I would in this case look for a wire worn through, sometimes touching ground, if it happens again. And you should keep starting and stopping it a few times...

HQ 6. As you can see from the picture, the bumper is marked HQ 7. This was the Bn. XO's vehicle. No dash between HQ and 6.

This is The foam mat the Military uses. NSN: 5640-01-386-6918 Part #: 88-21110 Part #: 5640013866918 Part #: FF40JM02 (Prime) Company: Soundcoat Company WIDTH 24 INCHES NOMINAL THICKNESS 1 INCHES NOMINAL NOISE REDUCTION COEFFICIENT RATING 0 3/5 NOMINAL LAYER MATERIAL PLASTIC...

This is the photo I referred to. This is pretty much the standard way the front of the trucks looked.

M7

Got you Lickin Chickin!

I know a guy, he lives here in town. An American. He was on active in Colorado, setting up a drop zone. He said there was not a cloud in he sky. Simply great weather. He leaned over to pick up something, and woke up in the hospital. The bolt blew him out of his boots. He is NOT the same fella I...

Do the wires have the metal tags on then to I.D. the wires?

My ground mounts are made of wood, so my method is to use short pieces of 10AWG wire from panel to panel frames and then from the middle strap, a drop lead to a ground rod. Should work too. But like I said, remove a panel in the middle and the ground stops there. And its labor intensive. But...

For a Marine, you do good work!!

All of the following NSN's and Part Numbers are good for your set: 6695-01-581-1306 6695-01-367-9723 6695-01-372-2583 2815-01-499-1057 96-23734 MSP6735 1500-2501 771721011800 8009291Q00 DT 17200-001-000 DYNT-17200-1 I would look them up in the net.

Gen set un-grounded? I worked PV for 10 years. Everything from dog houses, 5-6 MW parks and 3-5 MW roof installations, and larger. In 2022 we put up 17% of the PV in Germany. We NEVER, EVER, put up lightning rods of any type. Depending of your mounting system, you may need, or not need...

Hertz meter work now? :LOL: from the picture it looks rough.

Welcome Mark, I am sure LITD set you up right, and I know he mentioned to down load the TM's and get smart on this gen set. Get in to the threads and read what others have done and what things have happened to them.

You really can not screw up F1 & F2. Its DC voltage. If you haven't hooked up the VR yet, how can you test the hertz meter? No voltage, no hertz. In picture #4 you have some unhooked wires. Tape the ends up.

What classified add could you not respond to?

The engine and generator don't cool through the enclosure, they have their own pumped air. Go ahead and insulate the enclosure. But, make sure your insulation will tolerate 50°C temperatures. Of course the set cools through the enclosure. Thats why the gen sets all have a warning in TM and on...

The foam in the -24P TM is available, and it works fairly well.

TM 5-4210-219-10 , TM 5-4210-219-24 and TM 5-4210-219-24P ...or... T.O.36A12-8-17-1, T.O.36A12-8-17-2, and T.O.36A12-8-17-4 These TM's are not released to the public. I am sure that if you look hard enough, someplace will have them. But we are not to post them in this forum.