Search results

The morning update from the electric coop just increased the downed poles to 500 with estimates to increase after today's inspections. Looks like I will be filling up a portable fuel tank instead of jerry cans.

We had a spring snow storm this past weekend, and lost power. I have a small 6K comm'l gas genny that we use for those times when we expect our electricity to be off for a short amount of time. It works great to keep the heater and wifi going, but about nothing else. Electricity went off about 5...

or OKC or Amarillo

I can get it to topeka ks if that helps

If that were on my KW, I would put a new unloader valve in it. EZ swap, big snap ring pliars and a couple rags, make sure to clean out all the steps and grooves of the old grease, slime.

I read another thread on here where another gentleman did the sewerzuk mod and it didnt work at all. The mod would have made a dead short to 2 legs back to the generator head because the 2 grounds are bonded in the head if i read the schematic correctly on a 10 wire (804a,b)

Baxter, its for #1, its color. It went for its first real ride, 800 miles, now the display is dim, instrument lights have to be turned on to see screen. Guy, you did upload it but it says i need a special cable with a switch. There was no description to build the special cable. Enjoy your...

Can you assist me in finding out which pins to jump to ground, the tb that you posted for the screen says: Use the adjustment cable to set the contrast back to normal. To make the contrast adjustment, attach the adjustment cable to P27 connection on the CIM and connect the P31 power supply. I...

delete post, I changed my mind about what I posted.

What did you find was the problem?

I know it works very well on an 70" Petercar standup sleeper, but you quadruple the space and it might not do so good, but I dont know. But I do know that it worked well on a big sleeper.

OKC is extremely user friendly.

Got broke block 15kw load tested, it needs more tinkering, but it will get it top put back on today. Its running at 18kw, then bumped to 21kw and almost killed it. https://youtu.be/HZuCSmFHLV4

I wish I had a 577, need a M970 first, then a M983, then a 577. Dont know if it is points or solid state, it starts and runs better than a singer sewing machine, with batteries if it cold, if its warm, its 1 pull on the rope. I have been busy this week on the broke block 15kw, it has a motor...

Ok, I am finished editing my last post.

It looks like it is sitting forward about the width of the spacer washer. I am wondering if someone put the spacer washer on the front side of the alt. bracket instead of the back. Will go find a TM photo of what is correct. Item 12 is what you are looking for. It should be between the rear...

MEP 804A filters I didnt find any post that has listed the filters for a MEP 804A, so I spent a few hours on research. oil filter. pn. 8-97024607-1 nsn 2940-01-493-4533 Donaldson P551264 fuel filter on motor in the metal can. pn ut6404 part of kit 587810-0090, Donaldson P550673...

Wow, very observant on the 4.2. No commo track, its a fdc track for the artillery, haha. They make perfect jump starters, if the batteries are dead, then it works as the charger. I just hope there is enogh juice to start the 4.2, i dont like pulling on the rope

Well, until I get the over speed switch and the adapter found, the 'The Smoker' gets put back on the down line. But it did get the radiator flushed and antifreeze put in, so it will be ready when I get parts. Now we cant have an empty shop, so we spent the afternoon at a buddy's place picking...