Search results

connect the multimeter where

that is after test hitting the ignition several times today as well though

Its not the batteries I took the ones out of my wives car and my company truck earlier and it did the same thing with those.

I am getting 12.54 from the rear battery and 12.03 from the front battery 12.03 from the driver side alternator and 12.54 from the passenger side alternator

I do have a cheap multimeter which should work

I just bought It about two weeks ago. The Negative on the front battery goes to the lower block on the firewall the positive on the front battery goes to the negative on the rear battery and the positive on the rear battery goes to the top block on the firewall. My skill set is moderate I do not...

I am at my wits end after being all in under and around this thing for the past three days I wish I could afford to just take it some where to have it worked on but I cant. I just re did the battery terminals checked all the connections at the firewall

Ok well im gonna go bolt the starter back up and go through the connections again and if that does not work then I guess the thing is gonna have to be rewired

Ok is there any other relays or elecrical components that would cause the starter to just click because so far its still giving the same issues. I just retested the starter and it is engaging and spining good while off the vehicle

Ok just wanted to make sure other vehicles I have done had a big and small wire on one post then another small wire on the small post

Are there supposed to be more than two wires attached to the starter I seem two remember other starters i have replaced having three wires going to them

Also just did the doghead mod to the starter relay and that was not the issue either

Batteries tested good even charged them over night and still doing the same thing

Ok so it was running fine one day then the next I go to turn it over and all I get is fast clicking. My first thought was a bad starter silanoid since I just bought both of the deep cycle batteries. I replaced the starter and I still get the same thing. All the connections seem to be good and...