Search results

This rare 6.2 diesel 700r4 tv cable is on auction. I do not read Japanese, and was wondering if someone could buy it for me and add a mark up price for your time? https://page.auctions.yahoo.co.jp/jp/auction/l1006979499

Tire air pressure? Measure top of front springs to bottom of frame to determine spring sag. Check body bushings. Check axle spring plates and see if there are any shims missing if any? Measure frame to body and see if frame is bent.

Step #4 Bolt up the torque converter to the flexplate. Torque is 50 foot pounds. Install the 6 bolts with lock tight. Install bolts loose. Do not fully tighten until all 6 bolts are on to keep bolt holes aligned. Pic 1. Use 15mm short socket wrench to fully tighten the 1 bolt in between the...

Step #3 Install the 700r4 using a transmission Jack or a modified Jack like mine. Pic 1-2. It helps to have a buddy lift the trans on the Jack. Having a bottle Jack under the motor to make height adjustments helps as well. Pic 3. Use 14mm socket wrench and a plethora of extensions to bolt up...

Step #2 Install the TV cable into the 700r4. Carefully insert the rod threw the Tv cable bracket, gently give tension on the motor side of the Tv cable and suck in the rod into the Tv cable housing and carefully install the housing into the 700r4 and bolt it up. The Tv cable bolt size is M6x20...

With the th400 and np208 out… Step #1 Remove the Th400 flexplate using a 11/16 socket and wrench. Use a long extension bar to keep flex plate in place. Install the 700r4 6x10.75 bolt pattern (Gm 1407715) flex plate. Make sure the notched side of the teeth and weight on the flex plate faces...

Parts list continued… 11. 6.5 diesel oil pump gear drive with tachometer sensor on top (Gm 7849305) Pic 11 12. Transfer case to Transmission support brace. Pic 12 13. Oil pump gear drive gasket (Gm 14022649) Pic 13 14. 700r4 Transfercase adapter gasket and O-Ring Pic 14 15. About 15 quarts...

Ok gentlemen, I got the swap in progress! https://www.steelsoldiers.com/threads/the-one-stop-700r4-swap-m1009.206236/

Overview Please give many thanks to the 10+ SS members for giving me the motivation to create this thread. Chuckg, 4sdair, forest522, computer54, dezertdemond, Dsilverline, Chevymike, ssdvc, TheMod, Mullaney, royalflush55, 1love, Sharecropper… By popular demand! This is a REAL M1009 1984...

Need 2 more likes on post #426 by this Saturday morning!

I started the th400 to 700r4 swap by dropping both th400 and np208 yesterday. If I get 10 likes, I will do a full detailed wright up on the 700r4 swap

I would not do a 700r4 in your M1009 unless you have a minimal of 3.73 gears. I have 4.56 in mine and am currently in the process of doing the swap. If you do the swap, you will Benifit from a pre 1986 700r4 because it has a manual valve body inside that does not require an electrical switch...

Remote oil cooler installed in the rear underneath. It clicks on at 180 degrees now. Lowered the oil to 220 degrees when pulling 6% grade. Also got the Trailworthyfab beadlocks on the blazer. At 55mph it vibrates a little, even with 10oz of dynabeads in each tire. I will add more dynabeads in...

Just ordered the dyna beads directly. The instructions say 10 ounces per 37/12.5/r16.5. These things are not cheap. $147 with shipping, filtered valve cores and applicator.

Very nice write up! You are a great salesman! Thank you! Anyone else have experience?

Has anyone had experience with the 16.5 bead lock rims with 37” tires? Are balancing beads going to be required? If so, what is the best beads to help with balancing this combo? Would running a non corrosion antifreeze in the tire a good or bad idea to help balance the tires and rims as a...

Great info! Thanks! Yes I have the rod!

To end this thread… After talking with you awesome SS members and getting info from you much more knowledgeable gents then I and talking to the the Transmission Shop… We have concluded that the TH400 is still good but the torque converter stall values are not correct for the 6.5 Optimizer...

Wow! Thanks for all the positive feedback gentlemen!😜 No need to stress! I got the 700r4 pulled this last Friday and took it straight to the Transmission shop for a full rebuild.😎 They will put the best of the best parts in it and slap a 3 year, 36,000 warranty on it. Also new torque...

Quick update! The remote oil cooler arrived! Something I have always wanted for over 10 years and I am finally getting it! Trailworthyfab beadlocks with pvc inserts! Yep! They are on the way! The Antifreeze Green adds 5hp if yal did not know! My first wife would have not approved on any of my...