Search results

holy restriction.

sounds like a bad GP sensor. I would try to fix it.

you need one for the D60. I think i bought one from ebay.

5-10 minutes? I like the stock system and have a push button as emergency. unless you disconnect the blue wire your card will still work. so your really not gaining anything unless you push it longer than the card

Allied Electronics ? Electronic Parts and Components Distributor

No you need to buy one u bolt and 2 longer bolts for the front because of the Dana 60. The rear has u bolts that go up instead of down so you need to make or find plates

Meter and soldering iron/gun

you are going to need some more parts. RC does not make a 1 ton lift you will also need to buy 1 big ubolt for the front and 2 longer bolts 3/4 spring plates

Yeah a year ago I told him to stop copying me? LOL

i did v pointing to the front Danny :: CIMG1271.jpg picture by tabi524 - Photobucket

Find a new automotive shop and Go to ORD and buy a new king pin rebuild kit.

Have you checked the FAQ section and the search function? http://www.steelsoldiers.com/cucv/63412-vehicle-security.html

is that a ord high steer? and what steering box is that?

First off I want to thank 1stsarge for helping me out. I spent a long time on the phone with him and he walked me through the jist of the card. He then gave me the part numbers of the "most common parts to go bad" he said that he has repaired all cards with only using these parts. I only had to...

yep thats him

There was someone on here that worked for them, but can't remember their Screen name.

Did anyone else catch "the 3 wedge nuts" Did someone make a K20?

Those always rust out. what I did was go to wallmart or home depot and buy a gallon of rustoleum black. that will be your friend. just slop it on with a cheap brush. The reason they rust out is the design of the overlap water gets behind and they rot. You could get some black silicone or RTV and...

I have so photos from the ground up resto. Ill do it tomorrow.

i would it is a pre filter