Search results

Thats looking pretty good Nick.

The A2's have small drain plugs/screws on the lower inside frame rails, and the front of the rails have blocking plates.

They drilled holes in lower section of frame.....one forward, and one aft. I saw a frame this way with 1/2' holes. Mine had the holes, so I washed it out with a hose / water from the front , and from the holes....washed out some dirt and stuff.

An armored truck with a soft top ? Looks like old M1114 type armor.

You aint going to find a cut up or smashed uparmored humvee out there. After the de-mil, they'll probably go to the ports, and then china. The parts that are out there are from places that rebuild humvee's, and they get rid of them to the DRMO's, and then the surplus guy's bid and get the lots...

If it was in the box, then thats it.

You need the 12469158-2 if your going to put in the black control box you have. Its a round silver glo plug controller. Its all silver with a grey top if its Nartron, and its sivler with a black top and a yellow band if its KDS brand.

Welcome....those A3 trailers have the real heavy Humvee tires/wheels, so it will probably be to high for that truck you have. Also if your on a road trip and need to find a tire....those are only available at some surplus yards. You would be better off putting some regular 16" tires and wheels...

Its in TM9-2320-280-20-3

Those go with the late style Surp. belt setups in the 6.5na, and turbo motors. I've sold them new for alot less in the past...Less than $ 200

There are lots of used and New parts on G503, This sites classifieds, Hummer Networks marketplace and Ebay, and Me. Some Humvees are getting cut up in Tucson Az.

I have most of what you need.

Two weeks ago, on a weekend , I found two complete humvee's with slant back tops behind a police station in the weeds. So far they won't call back, and next time I'm east of Cailf a 1000 miles or so, I'll stop by and talk with the Sheriff during the week and see what they are going to do with...

PM sent

I tried 8ea. different GPS antennas with the Trimble and only the Trimble ant. worked:twisted:

Its available...its for the Plgr / Dagr pn 013-1981-010 I tested some of those small antennas last year with the Trimble and they worked. I'll break it out again and test it soon with about 5ea. different antennas.

Is this what you need ? GPS bracket, and I have two different antennas.

Front and back ? I'll be in Tx. next week and might be able to get some from a source.

If Ted does not have one available....I have some.

The late 12 bolt wheels are within a couple pounds of the 24 bolt wheels.....around 43 lbs. or so. I have one set left of the even spaced 24 bolt wheels.