Search results

I might have a line on some 14.00r20 XZL's will these fit on a standard 5 ton split rim and can they be run with tubes in them?

Today I went out to the truck and went to start it and all i got was a quick turn then nothing no power so I checked the batteries and the positive post on one batt. has melted down the middle and there is only half a post left and the terminal wont go small enough to fit. These are the walmart...

Do you pour it into your engine also?

I was in NAPA yesterday and came across this stuff called sea foam engine treatment. Has anyone here ever used it? when do you use something like this product is there any better products out there. I didn't want to pay the money for a can to find out some one blew their truck up with this...

Hi guys I need any or all the TM's for the PRC-77 on pdf especially the the depot maintenance level TM'S can anyone help?? Thanks

That's excellent thanks so much.

If you could get measurements that would be great I will make my own brackets then. Thanks for the help.

My truck is missing the bow storage rack on the bottom of the bed does any one have a pic of what it looks like without the bows in it. Would it be easy to make one?? is there one on both sides of the bed?

I got one it wont work with the vic-1 system properly I am told only one ear phone will work. I was told by a guy in the Canadian military that they were warned not to hook them up to a vic-1 system as it will fry the AM-1780 box because it has a powered or amplified mic. and it draws the...

I got a M813A1 with a Hiab crane on the back

When I did my M813A1 i worked the belts around the fan I didn't have to remove the fan

Is there any other place that has them as Saturn wont ship to Canada.

What do you guys use for a windshield washer pump I want to get my truck registered but it needs a windshield washer installed I asked if a bottle full of water was good enough if I just stuck my arm out the window :D but it was rejected is there a military pump? I seen some manual pumps...

I also used paper till Pdf came along. Now I just print out the pages of the part I am working on and you put it on a clip board you can touch it all day with your oily greasy mitts without wrecking your good paper tm's.

That's the way I want it to go but I am trying to figure out what I need to do all this I have a duel setup ant. already

I have looked everywhere for that TM but I can't find it do you have it on PDF or load it into the manual section that would help slot thanks guys

the AM-2060 and the RT-524 both need a MT-1029 tray to work but can I run one wire from the battery to the 524's tray then a power wire from it to the am2060's tray then a wirefrom that one to the Vic-1 all in a daisy chain? and have them all work together or is this to much power though the...

Can a RT-524 be hooked up to a am-2060 and the Vic-1 all at the same time? All I can find is that the Am-2060 powers the Vic-1 but can the RT-524 also be used in the power circuit through the Mt-1029 tray? so you can receive from both radios at the same time and transmit on one or the other...

I have not found any yet but on all of Steve Haney's eBay ad's it says he will not sell or ship to non US. buyers :cry:

Hey guys I am looking for about 500 meters of WD-1A field phone wire I found some on Ebay from Haney elctronic company but he wont ship to Canada anybody Know of someone that will ship WD-1 to Canada. Thanks