Search results

Some day I'd love too have the combo above:grin:[thumbzup] Even as wide as the M747 is, the M60 still hangs over the side. WOW8-)

Have you watched Ice Road Trucker? They pull tanker trains on there. The frist tailer has a fifth wheel plate on the back of the trailer and the 2nd trailer sits on top of the frist.

NO the VIN is 9 numbers long. For a '67 it should start with 01 or 02 then 32 then - or space then 5 numbers. The frist two number are the lot designator. 01 was early '67 and 02 was later in '67 The next two numbers are the type of truck 32 is for a M109A3 but the truck could have been...

The M939 has a 14' bed. It will fit like a 4XL on a L;-)

If it helps that hose I got was for a mid to late '70's ford bronco. May be you can cross the brake best to a Wagner# or some other. I found it by looking thought a Wagner illustrated parts book. And do not try to get the 2 copper washer for the banjo bolt on the wheel cyclinders from oreilly...

So how did you hook the two together?? I see the dolly but I did not think the M967 was set up to pull? Looks good. You can drop one at my LZ on your way past;-):p;-)

Your truck looks great. I'd watch the vid but I don't have 45mins for it to down load:xdarn dialup:x If you want too improve your lights with out spending $$ just paint the inside of the housing with sliver or crome paint.

The pick up tube in the tank is steel and WILL rust and get pin holes in it and this will make it a pain to prime. ASK me how I know. And for the 1st ? I would think your new filter should be fine, but like said above if the old filter housing has any rust in it there is nothing to stop it...

That is looking great.[thumbzup][thumbzup]

I will replace it (some day) but I will have to replace the wireing harnes also, as who ever removed it chopped out alot of the wires also:x. And the wire to the cold start is fubared all so. Tryed it one time and smoke started to pour out from under the dash:x:x Good thing I don't need it here.

The T-hawks are the newest tires made, and are listed in Titan catalog. So they are less likey to be dryrotted.

I've been running a truck for years with out that relay just fine. It came with out it and I never bothed to replace it. I was a newbe when I got the truck thought and did not know about this site.:oops: I put in a new switch and ran a wire to the starter.

Per the TM M105 axle are rated at 10K.

If you want to see hacked up wire jobs go look a police car!!!!!!!!

What do you want to do with it in the sand?? That makes a big diffrence too.

One of the MV places has that cron head greas now. I just saw an add for it.

Well I seen a guy pull a train with his teeth, you want to try that too??

I run my 27"TV(old) + sat reciver + 12 fluorescent light + all the other stuff in the ET center (off but they still draw juice) + run the diesel/K1 fired space heater(10-15min per hour) for 8-12 hour off one 12volt deep cycle battery.

The old batt is bad. If you keep it, its going to kill the new batt.

Thats why it has the sprag clutch. It lets the front free wheel untill the rears slip.