Search results

Sorry to here that!!! We love our dogs like family.

MY Eyes!!!

I like the paper towel and glove holders. With the M936's you need a lot of paper towels and gloves for sure!!!!LOL :) Did the filter show that it was dirty? :beer:

I think the two ports close to the ends are the vent ports.

You need one?

Rick, I got it for $1070 plus fees. It is good shape and the paint is good. I just hope she run and works.

I am new to the MEP-005A. I just picked up one from Barstow and it had not fluid or filters. I did a search and found some filter numbers but I am not sure if they come with the right o-rings or not. Here is the numbers I came up with, could you check and see if they are the right ones and do...

:driver:Glad the trip went well!!! Always more fun when it goes good. I guess the DOT officer liked the towing setup.:D

When I got my M923A1 the starter was not working. I took it off and just took it to a starter repair shop, $125 to repair it.

I will have to get it off and check it out. I hope it is a straight forward fix!! Will post some pics as I go.

That is a good looking truck!!!:driver:

I get about 7mpg with my M923A1 with 14x20's.

I have noticed that the HD motor on the hoist winch must be leaking into the gear box on the winch and over flowing out of the gearbox vent and the holes in the side of the winch drum. Does anyone know if you can replace the seal or rebuild the pump? Also who may have a new pump or know were...

I understand now!!! I was thinking about removing the engagement plate on the shifter linkage to disable the front axle lock up. Or just move it all the way to the end of the linkage. I think I saw a post that someone cut a slot in it and turned it.

Does it lock in, in reverse or low range?

I have three M939 trucks and two of them are hard to shift also.

Your pic looks like the PTO. But if it is a PTO or winch leak they are not to bad the repair, just takes a little time. Cost of parts are not to bad. Just check out the TM's and you should be fine. Good luck! :beer:

Nice job!!

I like the wet hub idea!!!:smile: