Search results

Chucky, I brought your PPE down to the house. Got to clean it up.

The sad thing of this picture is, that most of these batteries would be found good, and rechargeable, with the right equipment.

The rear cover has about 20-25 screws, maybe, then the big plate comes off. Not hard at all.

Look first. Then decide.

I knew a guy in contracting, we called Mr. M-113. He had a whole garage FULL of M-113 parts and TM's. When I stopped Contracting. I took my son to work and he spent two 8 hour days just burning TM's, while I returned parts. A CWO friend of mine walked in, and said, "Nope. It didn't get out of...

Instead of guessing, look. First, whats the serial number of the set? See special info below, for the MEP-003A. 4. Special Information a. (ALL) Identification of the usable on codes are: Code Used On Serial Numbers UOC A MEP-003A EZ00001 thru EZ00118 UOC B MEP-112A EZ00001 and UP UOC C...

Kapunui, Please change your location to the state you live in, IAW the forum rules.

This was a dramatic clip!!

That sounds about right to me Ray. One coil to close it, one coil to hold it closed. the holding coil is defective. I never took one apart, as I think I have only seen 1-2 go bad, ever.

First off, dont start it again. Then pull the cover off the back, and see if there is anything loose, or hanging off. Then remove Items 24, 33, 31. Take a gander in there to see if anything looks strange. Or burnt, Or arched. Let us know what you find.

Got to study here.

Link to TM's https://www.steelsoldiers.com/threads/all-the-tm-you-need-for-the-mep-804b.184812/ Attached is A5 Adjustment procedure.

Can you be more specific? What cable? What connections?

I used this type fuel tank cap on trucks and gen sets, in Germany, where its wet all the time, and the caps got rusty. I used the caps in Ft. Bliss, where the humidity is low, and rain is like hens teeth, and the cap got rusty. Its a problem with water in the fuel. The CECOM and TACOM both told...

Randomly, the computer will control the frequency, prompting me to make fine-tuning adjustments using a small screw on the Woodward. When the computer does not take control, I have to readjust the screw, allowing me to manually set it to 60Hz using the front knob. There is no computer in this...

Most of the Kasernen were used to house immigrants, at one time or another.

Knew some folks in 2/2 Cav. when I was in Bamberg. Was in Nürnburg a few weeks ago, and almost anything to do with the HQ and Kasserne is gone, or so changed, you would be hard pressed to know what it was. Sad, sad. But time goes on.

Also, Jbuck, You need to write the state you live in, in the location block, IAW the forum rules.

Try looking at this. Unless you can SEE that someone has fooled with the linkage, do not fool with it. The only time it needs adjusting, is when someone did not read the book and fooled with it. Or replaced it, and did not read the book.

Have you looked at the PU-797 TM? Everything you want to know is in there. The TM is too big to upload. See if you can send me a PM. If not, tell me here, and I will send you one.