Search results

I have to live with (for now) a Hertz gauge that’s pegged too high. Whats this problem? Have you checked your hertz with another method? Like Kilowatt meter? Or a MM that reads hertz? Is it too high and you can not adjust it down, but hear the engine RPM change when you try? Or stuck, even...

Oh well, now I have to deposit the 10K I was going to offer as start up money. What a hassle.

Welcome partner.

Back in the day, mid to late 80's, the core was changed. Our D.S. shop did several. They also screwed up, several. And that's the reason later, radiators were a pluck and turn in item. Later, 2020, or 2011 I helped change 4 HEMMT A4's and 2 PLS radiators. As much work as it was, I can not...

If that's what you really want to do, then start a "Parts Wanted" thread. Not only will you reach a bigger group of people, but its kinda one of the forum rules.

Simple, easy and effective. When are you making a limited run? Might be a market out there.

I know this is over kill, but SAFETY FIRST!!

Very appropriate color. Dont want to scare the natives when it is not installed right?

You can use the timing cover as a drain. just loosen the two screws, and then turn on the pumps. Give it a few min. If nothing comes out, loosen the lines to the "T" and take it out. If I remember right, the check valve should be in there or a fitting right below it. Its been 25 years since I...

Good morning and thanks for the post! The batteries on this set are less than a year old and were charged completely over the past couple days. It is cranking faster now than I have started and ran it with before, and is still showing ~25.2 volts after multiple cranking events. So I do not...

Are you going to give this to him for his birthday?

You know, the -24P should give you the measurements of the cables.

4X4, Why don't you start your own thread. That way you and us can concentrate on your problem better?

The TM's do not tell you who produced a part. They can tell you who supplied it to the military. That is not always the same. Post up some NSN's and or Part numbers, and often we can find another supplier and or other part numbers.

Not everything is in the TM's.

Another job well done!!

Where is that sending unit for the oil pressure gauge located? The diagram on the inside of the door does not really show anything, and there's no photos on the TM. 4X4, Please stop posting the same question in more than one thread.

Are you offering this engine for sale?

Ah! A Brother member of the WOPA! Good to know!

Just a reminder, you talked about selling parts in your first post. To do that, you need to upgrade your membership. And you do it in a "Parts for sale" thread. Not an open thread.