• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Csm Davis

    Questions, 5-ton, TX-Specific

    what about register as a RV using a trailer to qualify?
  2. Csm Davis

    sprag gear transfercase question

    the sprags only work in 1st and reverse if they get air pressure from the switches on the transmission so you can put switch in the main line to the trans to turn off the front shaft completely. I am thinking of away to engage the foward sprag in the higher gears without damaging it.
  3. Csm Davis

    Cummins Powered 5Ton Trucks

    this would be why about 150 pistons got junked at drmo a few months ago, sorry but i only got 6 :oops:
  4. Csm Davis

    Compliance with DOT???

    As a L.E.O.( law enforcement officer ) and someone who has crossed many of the states, I have never been pulled over in a MV for any CDL or weight issues. I also have personally talked to the head of Florida's DOT and others in Al, Ms, La, Ga, Ca, if you are NOT using your MV for commercial use...
  5. Csm Davis

    My BIG M925A2 Project Truck Is Home

    I have two new softtops if you need one or both pm me. If you already have one sorry. love the truck wish I had one.
  6. Csm Davis

    Fifth Wheel Looks Different on My 818

    have both I have both this one and the older with blocks Ilike this one for ease of use but I think the older one is better for me and guys that do more off-road the springs on the new one doesn't move as easy or as much as the old one with the blocks out. The new one unhooks easier and no...
  7. Csm Davis

    395/85R20 Goodyears on a 5 ton

    what is the weight limit on 16x20 Thanks Hammer now can someone tell the different weight limits on the different size super single tires. thanks in advance
  8. Csm Davis

    395/85R20 Goodyears on a 5 ton

    does anyone know what the diffrent backspacing is for the m924 vs hemett vs mtv wheels? Also if the 16x20 rub at full turn? Want to put bigger tires on my 818 & 816 and still use them hard.
  9. Csm Davis

    How much have you spent with GL?

    around $100,000.00 in 4 years owch:oops:
  10. Csm Davis

    What's 24v and what's 12v

    the starter is straight 24v the generator gage is 24v the glowplugs are 12v running off 24v with a drop down from the big resistors on the fire wall the alternators are 12v with a funky ground set up so they can be run into the same wiring for 24v most radio setups are 24v also, almost...
  11. Csm Davis

    Where are the requirements?

    then why this fourm?
  12. Csm Davis

    Where are the requirements?

    Would be nice if the requirements were easy to find for the newbes like me:roll:
  13. Csm Davis

    GL wants my Deuce back

    also the feds took 4 F14s from museums not so long ago so yeah they will get your truck if they want it.
  14. Csm Davis

    GL wants my Deuce back

    ok here is my take, GL asked for a part of a apc i bought as part of a lot that i had for months. They sent me a letter with an NSN and said it was a transmission well there was four diffrent transmissions all diffrent and all the tags were gone. they will come get the items but i didn't know...
  15. Csm Davis

    Suggestions Wanted! Your Input Is Welcome!

    great site guys, what about a forum for titles and tags? you could have one thread for each state and one for posting about any states and D.O.T. stories. I have seen many post in different places needing help getting their rigs tagged, even as a cop I have had problems getting a MV tagged and...
  16. Csm Davis

    m109 electrical connections

    start stop switch is for gen as is the big plug for remote gen control
  17. Csm Davis

    Is anybody going to the Lamar Rowlands Rally in Sampson, Alabama

    I will be there if all goes well this week :-D
  18. Csm Davis

    m109 electrical connections

    really need pics but I think the two plugs inside are for the heaters:-D
  19. Csm Davis

    New side exhaust

    great pics but I would still watch the bumps that bumb stop will go to half height with ease which will be 1-2 inches past your fender and thats on level ground, I would like to know if it makes contact when u go across a ditch on an angle.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks