Search results

I'll take one too when you have another batch made.

If it weren't for the chineese parts I'd of had a parts truck!

When the head fails there is no rebuilding it. I have a China hanJi head on my deuce and have no problems or defects to speak of. By looking at it there is no difference in the new one to the old. I paid just under $300 for the head, injector nozzles and shipping. I didn't install the nozzles. I...

I was being nice!

Be there hopefully Thursday night til Sunday In a Deuce, maybe flat tow civy Jeep too. Me and my big mouth female

Is anyone coming? I'm at the truck stop in o'donnell st. in baltimore. Been here for a while. Anyone know anything?

Mine will idle pretty well most of the time. It's when I left off the throttle and push in the clutch like when stopping it wants to drop rpms so low it has trouble staying running. If it doesn't shut off it does recover back to 800 rpm idle. I think you are right about the fuel shut off being...

Glad there was no forklift around! It looks like the plunger got stuck and broke the tang that engages the gear to the plunger. But it still idles down under what it is set at sometimes. This morning it cut off and wouldn't start again. About 30 minutes later it started and ran fine. I owe...

So what's the fix for this? mine does it too. It had always done it but now after a recent ip head replacement it will shut off sometimes.

Pushed it by hand!

That's right, read the damn manual. It will save you alot of headaches. Here's what happened, I forgot, ever forget? It happened to me! Got in my Deuce one morning headed for work. Just like every other morning for the past 2 years. Started up and ran fine. Was running on 100 % hydraulic oil...

I should have for sale or trade: • 2 new 9:00-20 ndcc's on deuce rims (not sure if the rims are new or refinished). • 1 M105 axle assembly • 1 M105 landng gear (single wheel type) • 10 used 9:00-20 ndcc tires (going to be very cheap) • 1 maybe 2 FREE steel 55 gal drums. doesn't leak and 1 with a...

•Cables break when misused or damaged. •Yep it's under rated, get a snatch block. •When I broke my shear pin, the winch just stopped. No cable lash.

I bought 2 M105a2 trailers recently and only one has a data plate. So I'll give you the one with the data plate and what I can find on the other. I'm not sure on what to put on the titles for them. I figure I can just make it up if there are no records. This is really an amazing thread to read...

Like someone said previosly dualing the front axle may get you on top a little better. Great pics! :-D

Kinda looks like the parking lot at work. Shows the rear articulating well though!

Always wanted to quote myself! 3113 doesn't work.

just went through my notes Now that I'm at work, I just went through my notes. I don't know where I got the # 3113. The 3540 is the same exact filter as the 3512 but it is 6 micron instead of 10. And someone said it comes with the correct gaskets also. Sorry about that

Your gonna need 2 - 33540 and 1 - 33113 wix numbers. take the first 3 off for napa. 3540 and 3113

If the shear pin cannot shear because it has been replaced by a bolt, It WILL break the winch. This winch shouldn't be able to break the cable even with a snatch block. This of coarse being that everything is in new condition and who knows what was done to them before we got them.