Search results

Added pics. had to cut out the lower corner of the RC mount to clear when installed as i had to mount them upside down so they would stick up instead of down to line up with the opening as the 3 inch body lift raised the hook hole 3 inches. By mounting them upside down they line up coming out...

Update . I know its been a bit i got busy with other projects but Iam getting pressure to get the lift freed up in the shop. Ok so I started working on the winch and bumper set up. Parts 12k winch with remote control and wired, winch plate Rough country for a 1500 & 2500...

updates! I was a bit busy today. I worked on the back tire carrier. Next started by reinstalling the bumper reinforcement then the bumper cover. I carefully transferred and drilled the holes to allow the carrier to be bolted trough the cover. Next had to cut the three bolts off the carrier that...

updates! Today i got a little time to work on the back bumper, Youll notice the welded performance bumper mounting brackets that are to allow the bumper placement with the 3 inch body lift, I welded them on rather then bolt them, I really like the performance body lift the hardware is robust...

Today I worked on the rear tire mount. I started with a hummer rear tire mount as they are cheap 179 on ebay. I used a piece of C channel 1,5 X 5 inch by 48 inches long. I used it so i could mount the spare from the rear hitch but made it so i still have a hitch. Tomorrow i will attach welded...

Check out. Tahoe MP USMC Vehicle build | SteelSoldiers wheel pics there. Can explain further for applications

Very nice. 17 inch is a great way to go many tire options with good pricing. I Just converted 17 inch rims with 24 bolt HMMWV rims as doners its a lot of work.

Joe looks like a nice truck. Iam thinking as well of buying one I own 4 dueces and 4 5 tons but never drive them. Ive been leaning toward vehicles that ill drive. That fits the local driving more then many others.

Hi Team. A few years ago I purchased a 2013 Police tahoe with 46k on it from florida. The plan is to make it a USMC MP looking vehicle. I finally got time and started building it. Ill be posting many pics. Presently Installing a 3 inch body lift, 3.5 inch suspension lift, just finished...

Thanks for that information. Iam also interested in 17 inch on stock looking HMMWV rims. I reached out to Trail worthy fab to see what they offer whether done or components, I will report back for others interested as well.

Hi dbalogh I noticed you said you live in Niagara Falls. I live 12 miles north of you in Youngstown NY. I own an Auto facility and collect MV's as well. If you need any help with buying transporting or repairing what you might get, I'll be happy to help you. I own 4 deuces and 4 5 tons along...

Its a hard call. I really like both. I have a lot of the m35s and 5 tons all manual. I really like them. Always start always run just grunt simple. Ill get you there and ill get you back as long as your sucking air and can play the peddles. My Tow trucks I run internationals I like the DT 466...

Had a great time last year hope to stop by again this year. Great bunce of guys Gails and vehicles.

My M817 Dump has a L/R switch on the dash and a valve on the floor. also 2 tanks.

Welcome to aboard. Its a great site lots of help and everyone likes to share knowledge and experience. The more you read the more you want to do once you find the time.

Great story , great vehicle it doesn't get any better. You really did the right thing and following through paid off.

Superthermal. The truck you have posted on post 1 looks like it has the rear hubs flipped on the 5 ton. I have a M 817 Dump with 16s on Hemtt rims. I have no issues. i plan on flipping my rear hubs when i do some brake work on mine this summer. I think they look nice with out the deep dish back...

Thanks so much. I ordered 60 came to about $ 150 for 5 gals. Now I can get fresh fluid in my trucks. I also ordered carb cleaner and brake cleaner it was a lot cheaper even with shipping then from our normal supply place.

Very interesting