Search results

I was on another forum and they suggested checking if i had a 4 prong relay instead of a 5 in K8 in fact i did. so i changed that out and now i have head lights but cant change to brights and still no dash lights. Also interesting is that k78 says its for lights. if i pull the fuse the whole...

The light plant really does not have much insulation. Its a fiberglass shell that opens up. The insulation on the Welder on the other hand is more substantial. Also an advantage to the Light plant is Mine has a 42 gallon tank, Welder has a 28 gallon tank. so separate fuel storage would not...

so I have a Multiquip 10kw power 300amp generator that uses a 3600rpm Kubota Engine. 4300 hrs and its quiet. Also i currently have a former rental Light plant with 5100 hrs with a Kubota and once again its quiet. So do not compare a screaming 3600 rpm gas engine to a diesel. Two very different...

old thread i know, this link no longer works. anyone have a replacement option before i fabricate one. Just brought home 2 units on trailers. One is a 05 with the 116a3 trailer and the other is an 09 with a newer trailer more modern jack on that one.

I just spoke with the yard manager Ken. m-f 8am-2pm and they just need a heads up to pull the equipment. I will be headed there tomorrow from Ohio

Anyone have experience picking up in Capac, Michigan. I have 2 trailered gensets to get and Gov Planet gave me a contact number but that was it. map quest shows a tow yard so kind of confused. anyone know the hours and pick up times. I going to drive this one since its only 3 1/2 hours and...

I also took a trip DQ for ice cream and to Oreilly auto parts. lots of looks as i backed that giant into a spot and went inside for my tasty treat. Guy at auto parts store asked if i could bring my big truck next time.

Another 802a lives thanks to a fuel pump from Light in the Dark. it also needed 2 new batteries and an air filter. Load banked it for an hour with (4) 1500 watt heaters, the wet stacking cleared. just a little haze at that load. Thanks for all the responses.

State Farm Insured my LMTV as a Commercial Policy, Liability only due to the unknown cost of replacement parts. because i am an existing customer is the only reason they would write a policy. I had to state the use of the truck as home improvement/Maintenance and it is a commercial recreational...

After stumbling through past threads am i correct in the Airtex 8135 being a replacement for the main pump? the Facet pump is a little more pricey but is available, but i like lower price better.

I have an 802a with 112 hours and it was missing batteries when i got it. Also in the video from GP it was a crank no start and the no fuel light was on. I got batteries in it today and filled with fuel. No start, fuel shut off works, the screen by the fuel pump was loose and bent. took that...

I drove my 1078 to Work Friday, picked up mk28 basic issue package crane and an MEP 802a i had shipped there. Normally only a 12 minute drive to work maybe 15 in the truck but it was a fun test. Only second trip in the Truck

Was at the show today. tried to find you but must have missed ya. I did get one from the Louisville mv club that was just outside of the next barn over

I understand all the issues that can arise with these. I am prepared if i have to replace well nuts and fuel lines or fuel tank floats. Was just surprised how much wet stacking from that few of hours. Also the 100 hour service had been performed but the air filter looks terrible. I will not...

Old thread but just bought an 802a from GovPlanet with 119 hours non reset unit and man this must never have had a load on it. headed out tomorrow for batteries and get it fired up. I have 6kw of space heaters to work it. Should be an interesting smoke show.

The panel where the radiator flow tank is has a circuit disconnect just inside the hinge of the door. Have you bought this machine yet? or read the TM's.

The faults will stay on until you clear them. So say you change voltage when it is in the off position, when you turn the set on it will show a warning that the voltage setting was changed. Hit the clear fault button and good to go

I shut my disconnect off in the machine so the screen does not draw power and stay on after shutting off the Gen Set.

More questions for the group. can not get my dash panel lights or my low beam headlights to come on. High beams work fine and are a newer bright white light. I have been in the breaker panel and tried swapping same size breakers, but have not come up with an answer. can someone lead me into...

Looking for an LMTV m1078 cover no bows needed