Search results

Nice Looking M Beautiful Country Thanks for Sharing TGP

Well I'm glad someone with knowledge explained that correctly. There's enough misinformation already. Tom

Nice truck Mark. Figured you were probably over here . Tom

Like the rest of the truck It's First Class! Tom

Marty, Welcome aboard, Don't worry about that valve in your application. As mentioned it's for the T-case control which your not using. Put more permanent plugs in and roll on. Tom

Spent time replacing filters, fluids, cleaning, installing winter front, on my M35A1, getting ready For winter, and soon listing it for sale. Then took it for a quick drive, parked and plugged in the battery tender. Bring on the cold! Tom

Thanks for the tip. After reading DH thread you posted and saw he list the compatible numbers the Sig-Stat 121 rang a bell After going through my electrical cabinets I found a couple 121's Wired that in and it all works as intended. Thanks Again Tom

The Electronic Flasher died from self inflicted short, when while changing fuel filters Last Month and stepping on the lower inner apron, pinching one of the wires to the frame. So I went to unscrew the plug to change flasher and broke the nipple off the flasher. Somebody before me fell asleep...

Sorry for the type O Yes Windows 8.1 IE 11 and I never had a problem until recently. Neither of the two address's will work https or http which will automatically change to https. Today I downloaded Microsoft edge on my PC (Win.8.1) due to increasing number of sites Informing me to update my...

I can't get to the site anymore from my PC with IE 8.5, windows 11 browser. I get This Page Can't Be Displayed Check the Address and Your Connection Went to a friend and used his machine with Microsoft Edge and worked fine. Is this a result of the upgrade? And means I need to get a newer PC...

The civilian Dist had the pop up oil door as shown. Military Dist. had the brass plug for obvious fording reasons. I oil mine at every oil change. Just a few drops will do. It lubes the shaft bushing. Tom

Seen those on some M601 Israeli Power Wagons. Tom

I use one 24V tender resting on the bed frame rail flange. Plugged in to a weather proof 3 wire cord and the other end to the Battery disconnect switch mounted on the battery box. The bed shields it from the weather. Been like that for years. Stop worrying, you'll be fine. Tom

Nice Truck. Some like to use quality rubber line from pump to carb routed over to Inner fender and back to the carb. I used 5/16 steel brake line routed as mentioned on my WDX Power Wagon And fuel hose on the M37 as a temporary fix one year at the rally. Still planning on changing it, but...

Need to have the heat shield as mentioned, above the pump. Typical military and power wagon vendors have nice reproductions available. Moving the fuel line from pump to carb. farther away from the manifold will help. Biggest problem is the manifold preheat stove (butterfly) located between...

No element that I know of. There should be a screen at the top. That is a civilian pump and there was another glass bowl with filter at the Carb. Earlier carbs had a element inside the carb., later carbs. had the bowl. The correct M37 pump was a dual action pump, meaning pumped fuel and Vacuum...

Looks to be a nice solid truck to start out with. The prior advice is spot on. Tom

IN Hope 2020 is Prosperous for everyone Here Tom Petroff

Probably needs a Shim. Tom

Everything I have, be car, truck, equipment, has a Battery tender brand tender. There are many cheaper ones, but I had have the best service from them. And they back them up. They have Solar too. Six 24Volt Tenders 16 12Volt Tenders 2 6 Volt Tenders Click : Industrial...