Search results

I bought the Facebook rods for a project. I did not have good luck with them so I bought Blue Devil (I think it was) on amazon and had great success. Personally I’ll buy the ones off amazon again. Sent from my iPad using Tapatalk

Yes get it out of the way early or curse in a language it doesn't understand. No guaranties but it's worth a try. :unsure:

Use Dextron 3, find a copy of the Quick Reference guide for HMMWV, Lube order and read the -10 all good sources of info. The TM's are your friend, all the info can be found in there, but if you're stuck ask, we've all been there once or twice. Dextron 3 in Transmission, transfer case and power...

Looks like a riv-nut, McMaster Carr I highly recomend.

Welcome from South Florida, there truly is a wealth of knowledge here. down load the TM's and have fun.

Have a look at your positive battery cable connects and where it goes thru from battery box to inside of frame. Mine was finger tight just waiting to short. Sent from my iPad using Tapatalk

Check fluid in steering pump. You said you checked pump u was that “ fluid in pump” ? Sent from my iPad using Tapatalk

Welcome from South Florida

Welcome from South Florida

Build one, that's what I did.

Welcome from South Florida

Welcome from South Florida

Welcome from South Florida

Welcome from South Florida

Cost about $60 for parts and shipping labor was free. Thing is I’ll use it as a test bed, I plan to modify it to accept different flashers. I also put rivnuts in my old mil flasher unit, so much easier to remove now. The mil flasher unit in my M998 is solid state and reportedly LED compatible...

Got bored so put together a flasher unit thanks to ideas and input from members. Nothing fancy just a 1"x2"x6" aluminum piece, a Grote flasher, mouser 3 pin connector, a 20amp circuit breaker and a couple rivnuts. It works good but did not fix my issue of turn signals not working with...

Thanks, I pulled up the wiring schematic and started tracing wires, I see the BO light shares a ground with the turn signals and it is still the original light, tomorrow I'll replace it with an LED and start checking/cleaning grounds. The only time its an issue is at night not being able to...

I may not have been clear. Headlights work normally. Turn signals work normally. Problem is when I have head lights on that's when my turn signals no longer work until I turn headlights off then turn signals work again. So I'm thinking it has to be something they share,,,? Voltage drop ? If I...

First I did a search, I found lots on turn signals but did not find any on my issue. So here it is... I have LED lights all the way around and an LED bulb in the turn signal switch. Turn signals work good until I turn on headlights, then no more turn signals. Headlights on, turn signals not...