Search results

Papabear Chester is also looking faward to seeing you even though your crew took real good care of him and I will see ir I can find you a few more pound puppys for your shop . AEC Retired Tony

How far are you from Ga I live in Rockmart Ga I have two that I will give you if you are PCS'ing out I put 35 years tolal in the Navy and Know how s&&t hits the fan at the last minute Pm me it that will help

My father retired from the Army and went to work for Lockheed in 62 at the GA plant he also worked on the C5A I went to work for them work for them in 79 and worked on the rewing of the C5A and the new C5B ,141, F22, 130H and the C130J AEC Retired Tony

A bunch fo the M101A1 and M101A2 have been going for over 500.00 on gl the last few auctions I bid the mim so I can see how much they realy close at . SO if you can get a nice one that you can look over good for 500.00 that is the way I would go far. AEC Retired Tony

Hndrsonj in rockmart ga has some for the gaser that can be made to work I have one on my truck he also has one on his they come with the hose the only thing you would have to come up with is the air valve and reg. AEC Retired Tony

I live in Rockmart Ga will do all I can to help . I have a bunch of green Trucks like M816 a bunch of M35s and other things AEC Retired Tony

I have a M1008 in Rockmart Ga I would trade you . It has the seats and the cover runs good great tires look new with spare AEC Retired Tony

Welcome from Rockmart Ga in the back woods AEC Retired Tony

area52 I put he electric pump in line be hind the valve from the tank everything else was back like it should be did not see any fuel comeing from any of the lines or the valve. AEC Retired Tony

Thanks doghead I will try the jerry can first AEC Retired Tony

And one more thing the primer pump seams to work. AEC Retired Tony

I will try going from the tank to the IP in the morning or should I go to the fuel filter I have the tool box off so it will not be hard to use a rubber line from the tank.thanks AEC Retired Tony

My M816 will run as long as I have a electrice fuel pump running. I have taken off the tank valve to make sure if was ok replaced all of the rubber fuel lines check all for air leaks did not find any . If I turn the electrice pump on and start it will run if the electrice pump is not in line...

I help biuld the C5B at Lockheed in Marietta Ga. AEC Retired Tony

I also got my kits from spring hill auto out of Fla. I just did 4 ot them to test them I put them on My M1031 that I have at my shop to see how they worked . The parts store can't realy check them out because of the the isolated grounds it is not in there manual. I paided 27.50 plus shipping...

under the hood on the heater box you can see a place were some wires go that are attached with to 7MM head screws take it out there is a resistor on it make sure that it not burned that is what controls the fan speed. AEC Retired Tony

How much do you want for it I am in Rockmart Ga. AEC Retired Tony

Look at the TM it tells you how to do it I just rebiuld 4 of them just be careful when you press out the bearing you can brake the case. you can buy all of the parts for around 35.00 everything new in side you don't get the rotor or field wiring but everything else AEC Retired Tony

Thanks for the help AEC Retired Tony

I am looking for the bowes for a cab soft top have new top and sides but need the metal parts . If anybody has or know were to get please PM me. AEC Retired Tony 2 M35a1 3 M35A2 1 M109 1 M816 1 M561 1 m1008 1 M1009 5 M105a2 1 M1031 other green things