Search results

Your better off going to u ship or a regular shipping company. It's going to cost you a few bucks.

Relay and 24 to 12 volt resistor.

Your better off having it shipped. If I had a low boy I could do it but I just have a 39 foot flat bed. Would be too tall.

Could be injection pump stating to die.

Any SAE rated Diesel engine oil. You people do know there are 3 manufactures of oil right? It's all the same base. Only difference are the additive packages. Also even full synthetic oil is just filtered base. True full synthetic oil is over 1000 bucks a quart and used in jet engines. I have a...

after a small timing advance, a good "tune up" my 09 would pull 25 MPG all day on the highway and high teens in the city. Not too bad at all I would say. if your not towing a double wide home the axles will hold up just fine. If the truck had ac... perfect. and you can add ac

no that was not gilberts truck that we all chipped in so he could get home. That was dakotafear

I cut it 25% with paint thinner mineral spirits I think. Been a few years but I know I cut it only 25%. I just sanded the trucks no primer. The correct way would to use a etching primer them paint. I did not use A hardener until my last 151 I had done. It does get a little glossy with a hardener.

Real CARC is Water based now... well for a few years now. I use Gillespie paint

Good score on the box. Can a passenger side tank be added to the stock 08?

you know OE parts are 5 times more expensive? I have rebuilt a few cucv's and I get the cheap fenders and other body parts. There all a little off and need some help to fit. even the OE ones need help. no need to buy the farm

i would take the hub apart and service the bearings and inspect/service the locking hub.

CC's old truck. It was a nice truck when I seen it years ago. 6.5 turbo and bumped fuel and all that.

I would like to buy the cross over steeering or trade for it. if you take the lift off you will need stock stuff to put back on. if you want to do some trading let me know I have all the stock stuff you will need/want. or we can swap trucks :) Richard

ahhh starter ......

leave it be. I am building my 08 the same way yours is built right now. same tires rims ... same everything

So you checked everything else like I suggested ?

Building a 6.2 to handle lots of fuel and boost is a very pricy road to go down. It takes a lot of work and heavy inspections to make sure a 6.2 block and internal parts can handle it. I just read a build on the Internet (google 6.2 diesel build) and it to me might not sound worth it. Well over...

Make sure tour headers are for a 1 ton and not a 1/2 or 3/4 ton. There will be a issue with trying to use headers for a 1/2 or 3/4 in the the 1 ton frame just like you have stated.

Have you tried eBay or just googled it? I got mine off the Internet by google and seek g what was out there.