Search results

And he lives in "Niceville".............Go figure......

Hey FMJ......... No Budwieser can in your pic???? What gives???

You can only break an emulsion in mineral oil with heat. To properly centrifuge the oil you'll have to get the oil up to about 90 to 95 degrees C in order to get any and all impurities and water out of the oil through a centrifuge. If you run oil cold through a centrifuge you will not get the...

I guess it doesn't have that noise anymore.....

If you're 180 degrees out of phase you'll get smoke.

Maybe thats why you don't have brake lights. Tie the two wires together and see if your brake lights go on. But first check them with an ohm meter to see if one shows continuity to ground with the switch off. Then check if one has voltage with the switch on.

P/N's 29585 and 22780 are Timkin Numbers

And this Ladies and Gentlemen is coming from a person who wears a possum on his head.........:lol:

This is gonna be GOOD!!!!!! Where's my popcorn?????

Check it with a mechanical gauge.

Do you have a timing light? If not go to Sears and buy one. Hook it up and check your timing. Then adjust to spec. If you can't set it due to distributor hitting block remove the distributor and reinstall it so you can set the timing. You can't diagnose anything unless your timing is set.

C'mon Drgreg........what does the weight of your "Tongue" have to do with the hauling capacity of a deuce?????:mrgreen:

Does Fedex Have envelopes that big??????

AND AN IPOD TO BOOT!!!!!!!!! You lucky Dog!!!!!

This is what I bought. I think clinto recommended it.Works really good...... StoreFront -- Motive Products Online Store

Check the accelerator pump in the carb

Heres one link http://www.steelsoldiers.com/deuce-modification-hot-rodding/19627-questions-about-flipping-rear-hubs.html?highlight=flipping+rear+hubs

Search for flip ping the rear hubs. Pretty straightforward and easy

Go on a diet.........sorry.........couldn't resist.........

Big Red..... Why is there snow on the ground???